Jump to content


Blogs



Photo

Making progress

Posted by Charlie in Becoming a Woodworker, Feb 18, 2017 - - - - - - · 15 views
birdhouse, woodworking

Here's just a quick mock up of what the Birdhouse is going to look like. I painted all the pieces, and today I'm going to go assemble them. I'm thinking that this is going to be more of a decorative piece to be kept inside my Dads house, instead of an actual outside Birdhouse. I'll assemble them, then begin putting all the shingles on top, then tape the house off and spray them with a polyurethane sealer. Then all that's left to do is assemble the base! Attached Image Attached Image

Photo

Need a pattern

Posted by Dan&Wendy in Dan&Wendy's Blog, Oct 30, 2016 - - - - - - · 276 views

I've looked all over and can't find a pattern of a badger. I know there are different ones but the one that is unique to Wisconsin. Any one that can send me in the right direction it would be appreciated.

Photo

Building "Street Cred"

Posted by Travis in Travis' Blog, Aug 04, 2016 - - - - - - · 340 views
instagram, social media, photos and 1 more...

Hello, my friends!
A little shameless self promotion. If you're an Instagram user, can you do me a favor and follow me? I'm trying to build up my numbers to get a little more "street cred." I mostly post projects that I'm working on. It's not all scroll saw work, but quite a bit of it is. The new Instagram Stories feature will also show some behind the scenes stuff, which is fun.

You can find me at: https://www.instagram.com/bytravis/

Thanks for helping me out.

Photo

Unburied by scroll saw

Posted by kkrunde in It's just me :), Jul 22, 2015 - - - - - - · 1,316 views

We had to quickly clean out our storage unit in the spring and sadly the only place to put the stuff was around all my equipment. But we donated most of the stuff in the last few weeks, so I can finally get to the scroll saw. I want to make a cabin with some trees, but haven't decided yet how I want to go about it. I saw this neat idea to use old, worn boards, cut out the shapes, and then paint other boards in bold colors to attach to the back.... it really does look nicer than I'm able to describe it.

I made some beeswax wood finish today and put it on some pieces I cut out last year and it looks and works very well. Was cheap and easy to make.

https://im1.shutterf.../rx=550/ry=400/

Photo

Cigar factory furniture part 12

Posted by grosa in grosa's Blog, Jun 23, 2015 - * * * * * · 1,519 views

Back to the hall table.
Picture 1, 2, 3, shows the pedestal after I pulled off all the tape. At this point it has been stained and 2 coats of pre cat lacquer have been sprayed and sanded.
Picture 4, 5, I pre fit the overlay and make marks at the bottom for alignment.
Picture 6,7, I use 1/4" MDF on both sides to protect the wood from the clamps. I am only applying the overlay on one side at a time.
Picture 8, 9, I do the same on the other side.
Picture 10, 11, This is what it looks like after they are all glued on.
Picture 12, 13, 14, 15, after it is all sprayed, it's time for assembly of all the parts.
Picture 16 - 29, Here is the table all assembled at the shop. I also made a chalkboard to match the two tables and I will show you pictures of it when I take the final install pictures. Bothe tables and the chalkboard are going in the same room. We will be installing these pieces on the 30th.
The last picture of the table gears show the date the gears were made.
While I was making these tables Diego was making a round desk. I will show you one picture of the desk. If I get enough interest on this blog I will post a bunch of pictures on how he made it. Just comment if you are interested in seeing the pictures. Here is the desk with the granite installed. The last picture is the hall table with the granite.

Attached Thumbnails

  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image
  • Attached Image


Photo

From: Turnings for an island

Posted by grosa in grosa's Blog, Jun 07, 2015 - - - - - - · 973 views

These turnings were 3" x 3" x 34", Poplar. I designed the template and cut it out on the scroll saw. Put the template on the Vega duplicator and turned them. About 1 1/2 hours.



Source: Turnings for an Iisland

Photo

Intersecting Word Art Tutorial - Written (Photoshop)

Posted by Fishman in Fishman's Blog, Mar 09, 2015 - - - - - - · 1,192 views

Ahoy! There seems to be some interest in a written guide for Intersecting Word Art. I don't have much free time, but really like to help give back when I can so I decided to take a stab at this for everybody.

I tried to keep it as short and to the point as possible, so if you are unsure of something or need further explanation just let me know. It was made for Photoshop users, but I'm sure can be applied to other programs. There are many ways to do things, the way I show is what I believe to be one of the easiest. Once you see the method, I'm sure you'll say "Is that it?!"

So wipe the sawdust off, grab a drink and lets get this started! :popcorn:

Click on images to view them larger!

Step 1:

Lets start by making a new document. You can do this by hitting Ctrl + N, or going to File > New.

I use the "U.S. Paper" preset for projects I'm going to print. So select that preset from the dropdown menu, give it a name if you want, and then hit OK. You should end up with something like this...
Posted Image
Now in the top menu, go to Image > Image Rotation > 90 CW (Clockwise). This is just to make it landscape rather than portrait. You could of also of swapped the Width and Height while creating the document to avoid this step.
Posted Image
Step 2:

Now lets select the Text Tool from the toolbar.
Posted Image
Then while clicking and holding the left mouse button, make a text box from one side to the other. You can just single click as well, but I like doing it like this because it's easier to center. Just preference, no matter how you do it you'll end up with something like this.....
Posted Image
Now go to the bar at the top ( might be elsewhere for you). Select a font you like (I chose a Sans font for this), choose a size, center it, make it black, and hit enter or the little check mark.
Posted Image

Now lets take it one step further and edit the text a bit more. Go to your character window. If you don't see it, in the upper menu go Window > Character (make sure it's checked). With this we can change the spacing (kerning) of our text, size, height, and all sorts of things. Most commonly you're going to want to adjust the spacing between the letters.

To adjust the spacing between the letters, you need to select the letters you want to adjust. It can be all of them, or maybe just a few need adjusting.

Posted Image

So once you select the letters you want to space, you can type a number of into the kerning box, select a number from the dropdown menu, or even click/hold the little icon next to the box while moving your mouse left and right. You can enter a negative number if you want to make them closer together.
Posted Image
You can also make the text taller, wider, and all caps here. The little icon with the two capital "TT" is what you hit if you want to make all your text caps. Again, make sure you have all your text selected for this.
Posted Image
All numbers will be different based on font, project size, etc.. So just play around a bit to get a feel for it all. Make sure to hit enter, or hit the check mark to apply all your changes. Below is what I came up with.

Posted Image

Step 3:

Now is a good time to move/center your text if you haven't already done it. If you did the text like I did, it should already be centered left and right. To move it up and down select the text layer, in the layer panel. ***If you don't have it, go to the top menu again under Window > Layers (or hit F7)
Posted Image
Select your move tool, from the toolbar (or hit the "V" key).
Posted Image
At this point you can move your text layer. Assuming you already have it centered left/right... hold the Shift key, then while left clicking and holding you can move your text up and down. Holding the shift key prevents you from moving it left and right. So go ahead and eyeball it in the center and that will be fine. Depending on how you cut this, you don't really need to even center it to the page, it's good practice though.

Now using the same methods before, lets create another text layer. For now make it under your current text. Pick a nice script font, black, make it smaller than the first of course (this is the overlay text). I'm going to use Birds of Paradise font for this tutorial, I think people are are most familiar with that. This is about what you should have by now....

Posted Image

As you can see, this font is indeed a bit wonky. We need to fix the kerning on it. So back to the character panel as before, and make your changes! Ah, much better....

Posted Image

Now, it's time to move this new text layer over our big old one. Make sure the new text overlay layer is above our old one in the layer panel (you can drag and drop it above it if need be), select the layer and move it over using you've learned so far.
Posted Image
Posted Image

Yes! I know it's hard to see, you're probably freaking out at me "WHY DID YOU HAVE US MAKE BOTH OF THEM BLACK?!?!"

Don't worry, if it looks like the above picture you're doing great. The magic will happen in the next step!

Step 4:

Double click your text overlay layer (the smaller one) in the layer panel. Make sure you double click the layer and NOT the layer's icon/thumbnail. This will open up the Blending Options window. You can also get to this by right clicking the layer, and then going to Blending Options.

Once there, make sure the preview box in the upper right is checked. This lets you see the changes live (without having to hit OK). Now click "Stroke" on the left hand side. Choose a size that looks good to you (probably around 30), make sure the position is set to "Outside" and set the color to white. Once everything looks good to cut, hit OK and bask in the easy magic you just learned! Here is what you should have...

Posted Image

Almost done, just a little cleanup is all that's left.

Step 5:

Now is a good time to save, once you do this step you can no longer edit your text. You can undo it, but for simplicity sake, just finish editing your text and save your work.

Now you're going to right click the background layer, in the layer panels. Remember to NOT to right click the layer icon/thumbnail. Then choose "Flatten Image." You should be left with one layer; background and text all combined.

Now choose the paint bucket tool from the tool bar.
Posted Image
Now click on the foreground color swatch (on the bottom of the toolbar), and picking a nice easy to see color (I use red).
Posted Image
With your one and only layer selected, click anywhere on the background of your image to fill it all (or most of it!) with red. This is going to help reveal any islands/cleanup. You should have something like this....
Posted Image

As you can see, it has revealed all islands to us. So if we were to cut this how it is; we would have some fallout.

Step 6:

Make a new layer by going to your layer panel, and hitting the new layer icon. Make sure your new layer is above your background layer. You can also make a new layer with Shift+Ctrl+N, or make a new one via the menu up top under Layer...

(You don't HAVE to make a new layer, but it's so easy and can be helpful....I would just do it)
Posted Image
Now select the Brush Tool from the toolbar. Then change your foreground color back to white (same as our background color).
Posted ImagePosted Image
With the Brush Tool selected, go to the brush settings up top. Click the little dropdown menu to access basic brush settings.
Posted Image

Choose a circle brush, set the hardness to 100% and choose a brush size. This is going to be used to make the bridges, so something big enough to actually work when cut, but not so big it takes away from the work. I chose 18 for the tutorial, but probably should of done it a tad bit bigger. Just look to see what's right fro your project.

Now with your brush, and new top layer selected go to your islands and draw some bridges to get rid your project of those pesky things. Don't worry about going over the letter into the red, just don't go into ANOTHER letter. Try to keep the line going through the letter as straight as possible. What's on the red doesn't matter.

Now I'm going to share a quick tip for general use, and for "O" or letters/numbers alike. How to make a straight line easy! Start by taking your brush and clicking once on the outside of your chosen letter. Like below...
Posted Image
Holding shift, go up top diagonally and click your brush once. What this does is makes a straight line between the two points. You can use this method for all islands or anytime you don't trust your hand to make a straight line. See below...
Posted Image
The random patches of white you see is me just cleaning up some of the little left over black text. You can see them a few pictures back.

Step 7:

Alright, so here we are at the end. I'm sure you're itching to get back to your saw by now.

Go back to your layer panel, right click the background layer and flatten the image again. Just like before. Then select your paint bucket tool, make sure your foreground color is white, and I'm guessing you know what to do by now. Turn it from red back to white! Like below...

Posted Image
Step 8:

Sit back, and enjoy your new pattern! I know it seems kind of daunting and perhaps like a lot of work, but once you get the hang of it you can make these in minutes!

I hope you learned something, and I hope you enjoyed this tutorial. I worked on it pretty much all day because I love the Village so much! Sorry if I failed to explain something in more depth. I was really trying to keep the images down to a minimum. If you have any questions don't hesitate to ask.

Photo

rookie questions

Posted by drn in drn's Blog, Feb 24, 2015 - - - - - - · 1,220 views

can anyone tell me why by s-saw blade turns to the right as sonn as I start to saw. Tension is tight, table level and at 90 degrres to the blade.

does a delta 40-694 have a vacuum port to remove dust with my wet/dry vac? I want to know before I purchase one.

Photo

Wooden Toy Train

Posted by whirldworks in Patrick's Scrolling Adventure Blog, Dec 16, 2014 - - - - - - · 1,115 views
toy, wooden, train

Wooden Toy Train I had to put my newfound scrolling excitement aside for the month as I became busy building a toy train for my son for Christmas. It isn't exactly a scrolling project, but I did utilize my scroll saw as much as possible for cutting and shaping the smaller pieces. The engine is finished and the cars are almost done!

A family friend gave us a box of Thomas the Train and Brio tracks so thankfully I don't have to figure out how to do those with my limited tools.

Photo

Herkermer Diamonds on my wife Susan's birthday

Posted by LarryEA in LarryEA's Blog, Sep 15, 2014 - * * * * * · 1,167 views

It's Susan's birthday, my wife of course and her wish today is to visit our friends in the Catskills.
The Catskills as in the Catskill Mountains, as in Washington Irving, Rip Van Winkle and Sleepy Hollow.
The Catskills are also home to many summer resorts, one of which is 1/2 mile from our friends home.
Baumann's Brookside Resort.
Susan want's to show her latest quilts to Marie. So I decide to take a few pieces of scroll work.
Mini vases, inlay cheese boards, bowls and a couple other small items.
We leave at 2:30 PM to take a 2 1/2 hour drive knowing the drive will be longer than our visit.
We pulled in at 05:00 PM, right at dinner time. Marinated venison and rainbow trout with Butter& Sugar corn.
Our friends family are Mom Marie, Dad Glenn, Daniel and Kenneth.
After dinner was show time for my scroll work. I enjoyed their admiring and questions of how did I cut that.
One of the mini vases is a gift to Marie.
Daniel, the oldest son asks if I have ever dug for crystals. It's his 'show' time. He has a few hundred of these amazing shaped crystals known locally as Herkermer Diamonds.
WEB description:
Herkermer diamonds are rare double terminated quartz crystals found only in Herkimer County, New York. They were named Herkimer diamonds due to their diamond-like shape. A typical Herkimer diamond has 18 natural facets: six upper, middle, and lower facets. They are also known for being very bright and incredibly clear. These quartz crystals are sought after also for their power and energy to boost clairvoyance abilities
and healing powers.
Daniel explains that these crystals are fragile and will shatter on any attempt to drill thru them. The Herkermer has to be glued under 40 lbs. of pressure.
He shows a video of digging for the crystals. Actually, the digging method is with steel wedges to lift
segments a shale until you find a pocket. These pockets are where the crystals 'grow'. There is always excitement when you find a pocket, you never know what you will find inside.
Herkermer Diamond pictures:
Attached Image
Attached Image

Our visit is nearing an end and we all wander out to our car. Glenn tells us that Daniel has one
more thing to show us. Daniel opens the trunk of his car and fills a gallon jug full of water.
Goes and gets in the drivers seat, starts the car and says,'Watch this.'
A stream of water squirts out the front grill of the car. The distance of the stream is about 20 feet
of which he is able to direct both to the left and right.
The humor came when Daniel explained it was for the guests at Baumann's Brookside Resort.
The guests at Baumann's act as if they own the road that passes by the resort. The water is
Daniel's revenge. He directs the hose up in the air in the direction of a guests taking up a portion
of the road and rains water down on them. Do the guests know it was he? Daniel doesn't think so.
Our day ended now, we head home.
Oh, Susan did not mention of wanting a Herkermer Diamond. But she asked me if I want to
dig for them.

Photo

Help needed to find manual/parts for my scroll saw

Posted by Bileo4 in Bileo4's Blog, Aug 11, 2014 - - - - - - · 1,747 views

Hello,
I recently was given a 18" scroll saw from a friend. It is a Bench Pro,SSW18;I've looked every where and ask all my local friends,no one has heard of it. Can anyone help me , I would like to have a manual so that
I can reference problems and help me with any minor repairs. I don't even know how makes this saw. Please HELP ! :roll:

Photo

2014 Canam

Posted by Rabbit5455 in Rabbit5455's Blog, Jul 26, 2014 - - - - - - · 1,249 views

2014 Canam I am looking for a pattern of an ATV, preferably a recent model of an Outlander. I used inkscape to get start the pattern, how do I continue from here? I have attached the original picture and the inkscape pattern. If anyone could assist me it would be appreciated

Attached Thumbnails

  • Attached Image
  • Attached Image


Photo

New Portrait Project

Posted by rbarfield in rbarfield's Blog, Mar 17, 2014 - * * * * - · 1,575 views
portrait, rbarfield

New Portrait Project This is a new portrait pattern that I'll start cutting out today 11/16/13. Just thought you might be interested in seeing what my patterns look like. I'm hoping I'll be able to update this Blog as the work progresses. The pattern is 17x15 1/2, and was created using Picasa. The hair lost resolution after I cropped, and zoomed in. I used a pencil to draw in the hair, and that just gives me a general direction when cutting. Hair is something that has to be free styled using my method. Having a high resolution picture make it much easer. Hope to update this as the project progresses... Roy

Attached Thumbnails

  • Attached Image
  • Attached Image


Photo

First Project of the year 2014

Posted by Bulldog557 in Bulldog557's Blog, Jan 21, 2014 - - - - - - · 1,158 views

First Project of the year 2014 This is my first project of the year 2014, the pattern came from Creative Woodworks & Crafts Magazine November 1999 issue pages 26 Designer Garnet Hall and on page 28 Painting By Jane Moore. I realy injoyed making this project as a Segmentaction project.

Attached Thumbnails

  • Attached Image


Photo

novice

Posted by kohr349 in kohr349's Blog, Jan 19, 2014 - - - - - - · 1,000 views

i just received a craftsman scroll saw it is an older model 5722470, it uses a pin blade, i am looking for a spiral blade for this model, does anyone know where i can order one or how to modify the blade or machine to accept the plain blades. i have checked on amazon, and ace hardware and on the craftman website. also i am in need of a manuel. does anyone have an idea

Photo

Most Recent Projects

Posted by austins93 in Austin's Blog, Feb 21, 2013 - - - - - - · 1,786 views

Ive been so busy with school and work that I have practically been begging for time to use my saw. here are a couple of my most recent projects. I do have a question for you guys about how you get your patterns off. I use a temporary spray adhesive to apply the pattern, but I have found that sometimes it sticks a bit too hard and wont come off. that happened with the first of the two projects in this post. I sanded it off for the most part, but it was really just a practice piece. I was trying out the reverse blades. I like them alot. tell me what you think.

- Austin

Attached Image Attached Image

Photo

nose dive on dovetails

Posted by kardar2 in kardar2's Blog, Jan 25, 2013 - - - - - - · 1,268 views

nose dive on dovetails Well yesterday was my first ever at trying to cut a dovetail and as you can see by my picture you know it was failed miserablly. So tomorrow is Friday and plan on trying again. I also am trying to get my light box panels painted to. So. Steady as she goes.



  • 28 Total Blogs
  • 70 Total Entries
  • 97 Total Comments
  • Becoming a Woodworker Latest Blog
  • Charlie Latest Blogger

0 user(s) are online (in the past 15 minutes)

0 members, 0 guests, 0 anonymous users

Remove This Ad