Jump to content

We notice you are using AdBlock.  Please consider turning it off for Scroll Saw Village.  We rely on minimal ads to keep the lights on.  Thank you for your support.

Recommended Posts

OfficeMax is about $0.08 per sheet of 11X17" where I go.  I just copied really large Intarsia patterns for the Eagle I just did.  Went to the local print/graphics place and they charged me $1.75 a sheet!

Share this post


Link to post
Share on other sites

I take the normal pattern to Office Depot and have them enlarge them. I have had to have them do some on the plotter because they were too big for a printer.

Share this post


Link to post
Share on other sites

I went to a Copy machine store and purchased a large, used copier..... I have it in my shop, ready and waiting to use .... make copies up to 11x17 

works for me 

Edited by The Scroll Troll

Share this post


Link to post
Share on other sites

I bought a epson all in one printer it prints up to 13"x 19" from computer but has a 11" x 17" scanner bed. I was tired of making trips to town to get large copy's it was worth it to me.Here is a link to the the one I have.  https://epson.com/Clearance-Center/All-in-One-Printers/Epson-WorkForce-WF-7610-All-in-One-Printer---Refurbished/p/C11CC98201-N

Share this post


Link to post
Share on other sites

I bought a epson all in one printer it prints up to 13"x 19" from computer but has a 11" x 17" scanner bed. I was tired of making trips to town to get large copy's it was worth it to me.Here is a link to the the one I have.  https://epson.com/Clearance-Center/All-in-One-Printers/Epson-WorkForce-WF-7610-All-in-One-Printer---Refurbished/p/C11CC98201-N

 

Thanks for sharing that info.  I was thinking it would be nice to have something like that with the added scanner.  Will check it out.

Share this post


Link to post
Share on other sites

I use CutePDF. 

  1. It installs like a printer driver. 
  2. When you get ready to print your oversize pattern you select it as your printer. 
  3. Once selected you click on the properties tab. 
  4. On the properties tab you can select tiling and set the final size of the IMAGE you need., 
  5. It will then tell you how many pages its going to print., 
  6. You can also set the amount of edge overlap which lets you line up the pieces accurately. 

Works for me.  Russ

 

http://www.cutepdf.com

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




×