oldhudson Posted January 25, 2014 Report Posted January 25, 2014 (edited) Here's a little project I made this week. We received a nice set of steak knives for Christmas and they needed a home. I didn't want them on the wall (I didn't want to try drilling the tiles) and under cabinet wouldn't work because of the under cabinet lights so it meant having something on the counter. I saw a picture of something like this when I Googled knife block images. Cherry and maple, a coat of BLO and a couple coats of a wipe on varnish. The gap for the knives is just a non- through saw kerf. I cut a shallow dado on the face and added a thin strip of maple to close the face. Then added a base of maple. Edited January 29, 2014 by oldhudson Quote
Rob Roy Posted January 25, 2014 Report Posted January 25, 2014 Very nice knife block Berry. I like the maple contrast against the nice piece of cherry. Rob Roy. Quote
LarryEA Posted January 26, 2014 Report Posted January 26, 2014 That is very nice. Another nice part is you made a very useful kitchen item. Good job. Larry Quote
amazingkevin Posted January 26, 2014 Report Posted January 26, 2014 Quality work from a pro scroller in Michigan,knife holders should all look this good!you must have heat in your shop!!! Quote
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.