Bendita Posted February 16, 2014 Report Posted February 16, 2014 There is a few straight line in this pattern, little easier on the eyes bobscroll and Doug 2 Quote
rjR Posted February 16, 2014 Report Posted February 16, 2014 You know I am still going to haunt you. Can not find the thing you had 3 minutes ago and all the rest! Better you than me on all those kinds of cuts. I would have quit by now. It will be neat when finished. Keep on cutting! Bendita and Ron Johnson 2 Quote
Ron Johnson Posted February 16, 2014 Report Posted February 16, 2014 Good day Hans That makes two of us, and when you least expect it ... 'BANG' !!! Looks like a lot of cutting on this one as well but at least they're a few straight lines ... giving you and your saw a break from all those curves. Is your saw cutting straight? Should look great when completed. Bendita 1 Quote
amazingkevin Posted February 16, 2014 Report Posted February 16, 2014 the lady at the big box store CNC cuts these type things,i forgot the time it takes but it wasn't quick.she gives them away as table tops with legs.Her husband put together the machine some how and it takes a while to program it.Better to scroll it ,no mistakes there! Your love for scrolling shows! Quote
LarryEA Posted February 16, 2014 Report Posted February 16, 2014 Very nice pattern and our cuts look good. It looks like a challenge. Maybe you have said, what wood and thickness are you using.. larry Quote
spirithorse Posted February 16, 2014 Report Posted February 16, 2014 Great work, Hans, Are you preparing these patterns from the Geometrip site you alerted us to?That would be a pretty big job in itself deciding what can be cut without making the pattern unstable. God Bless! Spirithorse Quote
Bendita Posted February 16, 2014 Author Report Posted February 16, 2014 Very nice pattern and our cuts look good. It looks like a challenge. Maybe you have said, what wood and thickness are you using.. larry They call it triply here its 3/16 plywood good on both sides but not near the quality of birch plywood Quote
Bendita Posted February 16, 2014 Author Report Posted February 16, 2014 Great work, Hans, Are you preparing these patterns from the Geometrip site you alerted us to? That would be a pretty big job in itself deciding what can be cut without making the pattern unstable. God Bless! Spirithorse Yes I got this one from geometrip site some are copyright protected the ones I have done so far have all been free, I start out by selecting which one looks most stable then I shade in all the pieces I want to remove with a pencil its hard to see on the picture but its kind of designing in a way cause no 2 pieces I remove can touch one or another and ones thats done of course we drill pilot holes and start cutting. a whole disc takes 6- 8 hours cutting and another 1-2 hours design work. Quote
Phantom Scroller Posted February 16, 2014 Report Posted February 16, 2014 Hans all you need now is something circular to put it onto with a pattern all the way around it like the top. Roly Quote
spirithorse Posted February 17, 2014 Report Posted February 17, 2014 Thanks for the reply, Hans, VEry nice workmanship! Thanks for sharing and God Bless! Spirithorse Quote
ironman123 Posted February 17, 2014 Report Posted February 17, 2014 That is off to a good start. I am looking to see it finished. Ray Quote
areynoldsre Posted February 23, 2014 Report Posted February 23, 2014 I love the patterns you do. Can't wait to see this one completed. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.