CHIPPING THE RUST OFF

[amazingkevin]

HERE'S ONE FOR MY PHARMASIST TO DISPLAY AND ANOTHER OF TWENTY SAYINGS PLACUES  DONE,THIS ONE TOOK AN HOUR AS I USED A CORSER BLADE BUT THEN THAT CAUSED A ACCIDENT IN THE BOTTOM MIDDLE ,THE ONECURLY QUE DISAPPEARED SO I BALANCED IT OUT SCROLL REVERSE #12 FOR THE OUTSDE AND SOME INSIDE BUT THEN HAD TO SWITCH TO A #5 SCROLLREVERSE.tHE BLACK SIGN WAS DONE WITH A SCROLL REVERSE#3 THAT ONES ABOUT 6.5 INCH LONG 4"TALL I DIDN'T KEEP TIME ON THIS ONE.

[DWSUDEKUM]

Well Kevin all I can say is that you are well on your way working through any "rust" you might think you have.   Those look great my friend.  Thanks for sharing them with us.

 

DW

[Nick@tinkers-cove]

Another fine rescue job, Kevin - (but I see your still fighting with the 'CAPS LOCK' again. LOL

[bobscroll]

Yes Kevin you are doing a great job on them projects!   Thanks

for showing us, Bob 

[Rob Roy]

HERE'S ONE FOR MY PHARMASIST TO DISPLAY AND ANOTHER OF TWENTY SAYINGS PLACUES  DONE,THIS ONE TOOK AN HOUR AS I USED A CORSER BLADE BUT THEN THAT CAUSED A ACCIDENT IN THE BOTTOM MIDDLE ,THE ONECURLY QUE DISAPPEARED SO I BALANCED IT OUT SCROLL REVERSE #12 FOR THE OUTSDE AND SOME INSIDE BUT THEN HAD TO SWITCH TO A #5 SCROLLREVERSE.tHE BLACK SIGN WAS DONE WITH A SCROLL REVERSE#3 THAT ONES ABOUT 6.5 INCH LONG 4"TALL I DIDN'T KEEP TIME ON THIS ONE.003.jpg005.jpg006.jpg

Definitely no rust there Kevin. Have you been using WD40????. Superb job.        .

Rob Roy.

Edited June 20, 2014 by Rob Roy

[Lucky2]

Those are some of best rust removers I've ever seen Kevin, keep on cutting.

Len

[Phantom Scroller]

Keep lubricating them joints of yours Kevin you doing great. Roly   

[lawson56]

Well Kevin It looks like all the rust is gone.You doing Great.Top Notch work! :thumbs:

[wombatie]

The rust is well and truly gone. Both look very fine.

 

Marg

[frankorona]

Excellent work, very good reminder, thanks for sharing.  

[amazingkevin]

Thanks DW, i WORKED hard for years and years and got in the position of being able to scroll 10 hours a day .That's a lot of practice physically and mentally that i never wanted to lose .Sure enough being out of it for a little while it's like i never scrolled before.

[amazingkevin]

Your right  Nick.I wish the capitals light was a blinking light to remind me,lol

[amazingkevin]

Thanks BOBSCROLL,I did a few things today with the wrong blade but came out o.k. used a #12 instead of ia #3

[amazingkevin]

Thanks LEN ! Push push push or stay stuck in the recliner!

[amazingkevin]

Thanks ROLY,It was to much trouble to rout a groove in some pine blocks for the little people and i made a jig with two clamps and a stick to rout them with instead of unloading the shelve and take down one of two router tables to do the job.it worked but could have been a nightmare of an accident. I

ll work on setting one table up for this as i did alot of little people before so the need is there.

[amazingkevin]

thanks BOBBY,the rust is gone but the leg is holding me back to now.

[amazingkevin]

Thanks for looking MARGE

[amazingkevin]

Thanks FRANKORONA! every little thing helps