Multifasited Posted January 9, 2015 Posted January 9, 2015 This is the results of cutting out the latest mill ,I took the pictures as everything was ,just after I finished cutting slipped a background sheet under it moved the chair and took the pix. That's how good everything works ! amazingkevin and Scrolling Steve 2 Quote
amazingkevin Posted January 9, 2015 Posted January 9, 2015 You are the best,Thanks for showing before and after.I love seeing your shop even if its where you put your coffee down !LOL LarryEA and Doug 2 Quote
wombatie Posted January 9, 2015 Posted January 9, 2015 You did a great job, bet you are proud of it. I did this one a few years ago but yours looks smaller than mine. I entered it into the Royal Melbourne Show and came second, I think that was the best day of my scrolling life. Marg Scrolling Steve and Birchbark 2 Quote
Multifasited Posted January 9, 2015 Author Posted January 9, 2015 It's 91/2 x 11" , after cades mill ,this was easier ,or I was used to the tolerances better ,notice ,there was no saw dust or chips , on the saw or on the floor ,anything the vac didn't get & send to the chip,trap , the chip tray caught before they could hit the floor ,big stuff went in the trash can as they were cut out ,the only clean up is empting the chips out of the tray with the vac.hose , Sweet ! Some day all new saws with be like that ,and they will be house broken so you won't have to freeze or sweat using them ! wombatie and Scrolling Steve 2 Quote
DWSUDEKUM Posted January 9, 2015 Posted January 9, 2015 Excellent work on that. Where I grew up we had 2 mills like this... one was a museum and the other privately owned and was still working. This brings back fond memories. Thanks for sharing this with us. DW Quote
spirithorse Posted January 9, 2015 Posted January 9, 2015 Nice work! Thanks for sharing and God Bless! Spirithorse Quote
lawson56 Posted January 9, 2015 Posted January 9, 2015 Awesome just Awesome! I know your Very Proud of that cutting.Just a Fantastic Piece. :thumbs: Quote
Scrolling Steve Posted January 9, 2015 Posted January 9, 2015 The dust collection system worked great...and i now understand the series of cups in the surround tray. I love the old mills and you did it proud!...Thanks for sharing Quote
Multifasited Posted January 9, 2015 Author Posted January 9, 2015 Thanks everyone ,Steve, the alum. L-shaped partitions give it .it's strength and allows me to rest my arms on it in cutting small stuff as well as keeping blades and tools from sliding down on the tilt of the table ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.