blights69 Posted June 27, 2017 Report Posted June 27, 2017 (edited) I have been asked if I can do a gift for a friend to do with 5FDP i asked what or who is that lol apparently it is a rock band of some sort called 5 Finger Death Punch, I asked for an idea and have been given this picture wondered if any of you pattern gurus could do anything with it to make it possible to cut Thanks for looking and here`s hoping. TOOK PICTURE OFF AS IT HAD COPYRIGHT I HAVE CONTACTED FOR ANOTHER WILL ADD WHEN I GET IT THANKS Grampa did not even see that Edited June 28, 2017 by blights69 Quote
grampa Posted June 27, 2017 Report Posted June 27, 2017 Sorry but that image as a copyright on it...........Paul blights69 1 Quote
blights69 Posted June 28, 2017 Author Report Posted June 28, 2017 12 hours ago, grampa said: Sorry but that image as a copyright on it...........Paul OOpppss oh yea I will get in touch with them see if I can get another Quote
blights69 Posted June 28, 2017 Author Report Posted June 28, 2017 (edited) I have now been given this one do not need the writing at bottom but would be a bonus if this one is no good I will ask for another thanks for any help Edited June 28, 2017 by blights69 Quote
meflick Posted June 28, 2017 Report Posted June 28, 2017 @blights69 Frank, I guess the first question is what/how are you planning to make? A Plaque, cut it from a vinyl record, etc. I think depending upon what your "intent" is, will impact how the pattern is made. For example, if I were cut going to cut it out of wood and make it a plaque, I would think it would be possible to use the image you already provided as the "pattern". The Black would be your base and you would cut the "Five Finger" out of the base as well as the 5FDP (but need to fix the D and the P so as not to lose their middle sections.) Then you could cut the white part around the 5FDP as a separate piece that you overlaid onto the backer piece. If you wanted it all as "one" piece, then I would think you could do similar but would need to add bridges in to keep those shapes on the top attached somehow. So, knowing your "vision" for the piece would help figure out the best way to create a pattern for you. blights69 1 Quote
blights69 Posted June 28, 2017 Author Report Posted June 28, 2017 12 minutes ago, meflick said: @blights69 Frank, I guess the first question is what/how are you planning to make? A Plaque, cut it from a vinyl record, etc. I think depending upon what your "intent" is, will impact how the pattern is made. For example, if I were cut going to cut it out of wood and make it a plaque, I would think it would be possible to use the image you already provided as the "pattern". The Black would be your base and you would cut the "Five Finger" out of the base as well as the 5FDP (but need to fix the D and the P so as not to lose their middle sections.) Then you could cut the white part around the 5FDP as a separate piece that you overlaid onto the backer piece. If you wanted it all as "one" piece, then I would think you could do similar but would need to add bridges in to keep those shapes on the top attached somehow. So, knowing your "vision" for the piece would help figure out the best way to create a pattern for you. That is the trouble Mel I aint sure what to do yet so thought I would put up here see what happens as it is a band i will more than likely go vinyl no tht is it decision made I am going vinyl Quote
TheWoodArtist Posted June 28, 2017 Report Posted June 28, 2017 Just to give you a heads up. This image along with any for this band is copyrighted no matter if it's on there or not. It's their logo and it's is copyrighted. Just letting you know. It's kinda like other things even if it don't have a copyright on it, if it belongs to someone or is someones logo or picture it's copyrighted. Just be careful. blights69 1 Quote
blights69 Posted June 28, 2017 Author Report Posted June 28, 2017 12 hours ago, blights69 said: I have now been given this one do not need the writing at bottom but would be a bonus if this one is no good I will ask for another thanks for any help I also have this one too now Quote
Birchbark Posted June 28, 2017 Report Posted June 28, 2017 I'd remove the white on that last one, or any of them actually. I'm sure all that is probably copyrighted or whatever. But assuming you are just looking for a concept, here's mine... Russell blights69 and multitom 2 Quote
blights69 Posted June 29, 2017 Author Report Posted June 29, 2017 9 hours ago, Birchbark said: I'd remove the white on that last one, or any of them actually. I'm sure all that is probably copyrighted or whatever. But assuming you are just looking for a concept, here's mine... Russell Thanks Russell I was only looking for a concept to get an idea of something to use as all is probably copyrighted but thanks for your efforts I appreciate it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.