Playing card holder

[newfie]

Can anyone help me out with finding a playing card holder. I hadrequest to make one for a lady who had a stroke and can no longer hold on the her cards. They send me a picture of what they were asking for but wants fancier looking one. Here's the pic they sent me.

Thanks

Todd

[JOE_M]

You don't really need a pattern for that. Looks a 2.5x2x## piece of wood, thin-kerf tablesaw blade raised 1-1.5", make a pass, move fence, make another pass, move fence, make 3rd pass, raise blade to 2.5" and tilt 35-40 degrees, cut top part off, stain it, box it, send it on its way. I guess for "fancier"you could sand/scroll the 2 ends into a curve, or route the edges with a profile bit if desired.

[Birchbark]

This one looks tough, but very familiar with your work and feel you can cut this one.    But as always, feel free to make any changes to my idea that you need or want to make if you do decide to cut it.

Here's my idea, I'm sure you'll get others.  You're very good about posting pictures of the finished project, thank you.

Russell

[newfie]

2 hours ago, Birchbark said:

This one looks tough, but very familiar with your work and feel you can cut this one.    But as always, feel free to make any changes to my idea that you need or want to make if you do decide to cut it.

Here's my idea, I'm sure you'll get others.  You're very good about posting pictures of the finished project, thank you.

Russell

Thanks Russell greatly appreciated 

[amazingkevin]

On 10/20/2017 at 1:22 PM, newfie said:

Can anyone help me out with finding a playing card holder. I hadrequest to make one for a lady who had a stroke and can no longer hold on the her cards. They send me a picture of what they were asking for but wants fancier looking one. Here's the pic they sent me.

Thanks

Todd

Simplicity at its best,i need this for a job ,Thanks!