fishntechnishn Posted August 8, 2019 Report Posted August 8, 2019 Picked up a spare Excalibur EXll for parts. After looking at it it is too good to part out. Looking for some of the blade holding parts. Anyone have some kicking around or know where to source some? Thanks, Mike OCtoolguy 1 Quote
Scrappile Posted August 8, 2019 Report Posted August 8, 2019 (edited) this help? https://www.seyco.com/partspage/ Edited August 8, 2019 by Scrappile John B and OCtoolguy 1 1 Quote
fishntechnishn Posted August 8, 2019 Author Report Posted August 8, 2019 THANK YOU!!! That definitely helps. Mike OCtoolguy 1 Quote
Frank Pellow Posted August 8, 2019 Report Posted August 8, 2019 I highly recommend the replacement chucks by Pegas: https://www.bearwood.com/pegas-chuck-head-replacement-kits.html I recently installed them on my 20 year old Excalibur saw and they are well worth the price. OCtoolguy and John B 1 1 Quote
fishntechnishn Posted August 9, 2019 Author Report Posted August 9, 2019 Thanks to everyone!! I think I have the parts under control(hopefully) now I need to find out why the speed control does not go. After trying it I took it apart and found that someone had pulled out all the connectors! Anyone know where they should go?? OCtoolguy 1 Quote
OCtoolguy Posted August 11, 2019 Report Posted August 11, 2019 Give Ray at Seyco a call. He'll help ya. Quote
Scrappile Posted August 11, 2019 Report Posted August 11, 2019 Don't know if this helps but on page 60 of this pdf is a wiring diagram. This is provided by Axminster which is in the UK but it would probably be wired the same. Different voltage. https://www.axminster.co.uk/media/downloads/505078_manual.pdf OCtoolguy 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.