Popular Post OzarkSawdust Posted August 9, 2020 Popular Post Report Posted August 9, 2020 Not really bragging... but I did do what I've been putting off. Did you ever get to the place you can't find anything right on the bench? I was between projects this morning and told myself "you've got to do something with this mess"! So I cleaned up the workbench, and found a few things I thought I had lost! I'll post a picture...neat, clean, organized...it probably won't stay that way for long...LOL! Also I got tired of the tubes I have my blades in rolling around all the time. When I bump the saw table they will roll off onto the floor...and I have to stop and pick them up. So I dug around in Steve Good's site and found a "tube carrier" plan I had seen a while back. Didn't take long to cut out and glue up...presto, all my blades are organized and within reach! smitty0312, lawson56, frankorona and 7 others 10 Quote
wombatie Posted August 9, 2020 Report Posted August 9, 2020 I hate a messy bench, I like to be able to put my hand on what I want without searching for it. My OCD kicking in I guess. Marg OzarkSawdust and Dave Monk 2 Quote
lawson56 Posted August 9, 2020 Report Posted August 9, 2020 I know what ya mean,I have to clean mine up at least once a week,I Made me one of Steve blade tube Holders.Love it. amazingkevin and OzarkSawdust 2 Quote
smitty0312 Posted August 9, 2020 Report Posted August 9, 2020 Looks great.....I’ve got a little ocd going on in my shop too....a clean shop is a happy shop amazingkevin and OzarkSawdust 2 Quote
amazingkevin Posted August 9, 2020 Report Posted August 9, 2020 All you do gooders I'm having a shop cleaning party again! Nobody showed last time,lol Dave Monk, smitty0312, OzarkSawdust and 1 other 4 Quote
Fish Posted August 9, 2020 Report Posted August 9, 2020 Nice job. I'd clean mine off to but I can't find it! John B, OzarkSawdust, Rolf and 1 other 1 3 Quote
Rockytime Posted August 10, 2020 Report Posted August 10, 2020 Looks great! A broom is one of the best tools in the shop. Also a place for everything and every thing in it's place. You did well. OzarkSawdust 1 Quote
Fedido Posted August 10, 2020 Report Posted August 10, 2020 Nice work area. Is that a mini press in the background? How is that to use, I mean easy to drill pilot holes? OzarkSawdust 1 Quote
Smitty54 Posted August 10, 2020 Report Posted August 10, 2020 My grandkids are not aloud in my shop. They Touch things. I have two shops we make things in the basement, lots of fun. OzarkSawdust 1 Quote
OzarkSawdust Posted August 10, 2020 Author Report Posted August 10, 2020 15 hours ago, Fedido said: Nice work area. Is that a mini press in the background? How is that to use, I mean easy to drill pilot holes? Not sure which you're talking about. I have a Central Machinery 8" bench drill press on the far right. I use it a lot and keep a 1/16" bit in it mostly. Then between that and the sander is a Dremel in a plunge router attachment. I use it for tight fretwork and keep a #56 bit in it mostly. Both work out great for what I do! Fedido 1 Quote
Fedido Posted August 10, 2020 Report Posted August 10, 2020 8 minutes ago, OzarkSawdust said: Not sure which you're talking about. I have a Central Machinery 8" bench drill press on the far right. I use it a lot and keep a 1/16" bit in it mostly. Then between that and the sander is a Dremel in a plunge router attachment. I use it for tight fretwork and keep a #56 bit in it mostly. Both work out great for what I do! That was exactly what I was asking! Thank you for the nuggets up. OzarkSawdust 1 Quote
namunolie Posted August 10, 2020 Report Posted August 10, 2020 nice work for you I hope it is long long lasting~~ OzarkSawdust 1 Quote
Rockytime Posted August 11, 2020 Report Posted August 11, 2020 Is that a Kobalt table saw folded up in the second photo? Quote
OzarkSawdust Posted August 11, 2020 Author Report Posted August 11, 2020 12 hours ago, Rockytime said: Is that a Kobalt table saw folded up in the second photo? Yup, I got it a couple of years ago. I would rather have a big Sawstop or the likes...but a little less than $350 was closer to my budget than $1,000 - 4,000 ! The only thing I don't like about it is the fence, and it may just be the one I got. You have to release it on both ends, set it, and secure it on both ends. But they aren't the exact same! I've got to where I set the close end, measure from the end of the table to the fence where the ruler is, then measure the same on the far end of the fence...adjust it, and set it. 95% of the time I move it 1/8th to 1/4. Wish I could find a good, accurate aftermarket fence that clamped on one end. Quote
Rolf Posted August 11, 2020 Report Posted August 11, 2020 (edited) 5 minutes ago, OzarkSawdust said: Yup, I got it a couple of years ago. I would rather have a big Sawstop or the likes...but a little less than $350 was closer to my budget than $1,000 - 4,000 ! The only thing I don't like about it is the fence, and it may just be the one I got. You have to release it on both ends, set it, and secure it on both ends. But they aren't the exact same! I've got to where I set the close end, measure from the end of the table to the fence where the ruler is, then measure the same on the far end of the fence...adjust it, and set it. 95% of the time I move it 1/8th to 1/4. Wish I could find a good, accurate aftermarket fence that clamped on one end. Take a look at Kreg's web site they have some excellent aftermarket fences, maybe one of those will work for you. Ozark, Unfortunately I did not inherit the organizational gene from my German tool maker Dad. Edited August 11, 2020 by Rolf Quote
OzarkSawdust Posted August 11, 2020 Author Report Posted August 11, 2020 10 minutes ago, Rolf said: Take a look at Kreg's web site they have some excellent aftermarket fences, maybe one of those will work for you. ??? Kreg...jigs? What website? Quote
Rolf Posted August 12, 2020 Report Posted August 12, 2020 OK it seems Kreg does NOT make a table saw rip fence. They do make miter fences which I have. I do have a Kreg Band saw fence, which is very accurate. Maybe it could be adapted https://www.kregtool.com/store/c48/saw-attachments/p86/precision-band-saw-fence/ It seems most quality after market fences cost more than the saw. 23 hours ago, OzarkSawdust said: ??? Kreg...jigs? What website? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.