Nonprofit Colorado Company Request

[bighaas70]

Hello all. I took a long while off from scrolling, but I am getting back into things! I have a request for a nonprofit plaque, and I just don't think I can make this right. Is there anyone out there who would like to give this a crack? I would appreciate your expertise. Thanks so much.

Gordon

[WayneMahler]

Nice looking logo. I have attached a pdf file with the patterns inside. I figured the best way to do this was in layers. See if this will work for you and if it does please post a picture of the final project. 

Logo.pdf

[bighaas70]

20 hours ago, WayneMahler said:

Nice looking logo. I have attached a pdf file with the patterns inside. I figured the best way to do this was in layers. See if this will work for you and if it does please post a picture of the final project. 

Logo.pdf 23.54 kB · 3 downloads

Wayne, Thank you so much! You really took this to another level, and I greatly appreciate your work. The company is looking for a similar 2D version of my military plaques that I do. It would all be cut from 1/8" baltic birch ply, and then matted over a flag image. I love what you did, but would you want to simplify into a 2D single pattern? If not, I can try to do some cut and paste. I am attaching a picture of how I do these. Again, thank you so much!

[WayneMahler]

9 hours ago, bighaas70 said:

Wayne, Thank you so much! You really took this to another level, and I greatly appreciate your work. The company is looking for a similar 2D version of my military plaques that I do. It would all be cut from 1/8" baltic birch ply, and then matted over a flag image. I love what you did, but would you want to simplify into a 2D single pattern? If not, I can try to do some cut and paste. I am attaching a picture of how I do these. Again, thank you so much!

 

Try this Gordon.

It's 2D but will have some very sensitive areas such as the rods. I could only put so many bridges in for strength . This is aprox 7 1/2 x 7 1/2. It can be blown up if you know how to do that. Hoping this will work for you.

[spirithorse]

Fantastic work on both patterns, Wayne!
Thanks for helping out so generously.

God Bless! Spirithorse

[bighaas70]

On 5/7/2021 at 5:54 PM, WayneMahler said:

Try this Gordon.

It's 2D but will have some very sensitive areas such as the rods. I could only put so many bridges in for strength . This is aprox 7 1/2 x 7 1/2. It can be blown up if you know how to do that. Hoping this will work for you.

Thanks Wayne! I will give this a shot, and I'll hopefully be able to post some pics when it is finished. Really great work, and I thank you. Now I just have to decide if I want to go after this thing with the saw! Thanks again.

[bighaas70]

On 5/11/2021 at 8:38 AM, bighaas70 said:

Thanks Wayne! I will give this a shot, and I'll hopefully be able to post some pics when it is finished. Really great work, and I thank you. Now I just have to decide if I want to go after this thing with the saw! Thanks again.

 

On 5/7/2021 at 5:54 PM, WayneMahler said:

Try this Gordon.

It's 2D but will have some very sensitive areas such as the rods. I could only put so many bridges in for strength . This is aprox 7 1/2 x 7 1/2. It can be blown up if you know how to do that. Hoping this will work for you.

Wayne, I am sad to say that this client decided they wanted to go with a laser engraver instead of a scroll saw cut. Your design was fantastic, and I wish I would have gotten the chance to make it to post. Just wanted to circle back and let you know the outcome. Thank you for your time, and I appreciate you. ~Gordon

[WayneMahler]

4 hours ago, bighaas70 said:

 

Wayne, I am sad to say that this client decided they wanted to go with a laser engraver instead of a scroll saw cut. Your design was fantastic, and I wish I would have gotten the chance to make it to post. Just wanted to circle back and let you know the outcome. Thank you for your time, and I appreciate you. ~Gordon

Thanks for the kind words and letting me know they went a different route. Maybe next time you'll get the commission. Stay safe.