Jump to content

DWSUDEKUM

Member
 View Profile  See their activity

  • Posts

    15,020

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by DWSUDEKUM

  1. DWSUDEKUM
    Very nicely done. Thanks for sharing this with us. DW
  2. DWSUDEKUM
    Very nicely done Jim. Those all came out great. Thanks for sharing them with us. DW
  3. DWSUDEKUM
    Nicely done Thomas. Thanks for sharing this with us. DW
  4. DWSUDEKUM
    Good use for scraps. I like that you are using it for keeping the remotes in one spot. Thanks for sharing it with us. What woods have you used on it . DW
  5. DWSUDEKUM
    That came out great. Thanks for sharing this with us. There are several methods you can use to get your saw square to the blade. You might wish to get a 2 inch square and that will help get you there. Another old time trick is to get a piece of wood that is flat but about 1 1/2 or 2 inches thick. You take this piece of wood and with the flat side to the table make a cut into the side about 1/8 of an inch. Pull it back turn off the saw then rotate that piece of wood so that the kerf you just created is on the back side of the blade. If the blade fits the kerf perfectly then your table to the blade is squared up. I use this method a lot as it is quick and easy to check to see if your saw is still squared up. DW
  6. DWSUDEKUM
    Those came out great Roly. Thanks for sharing them with us. DW
  7. DWSUDEKUM
    Looks like you are having a blast. Those came out great. Thanks for sharing them with us. DW
  8. DWSUDEKUM
    Very nicely done Kris. Thanks for sharing this with us. DW
  9. DWSUDEKUM
    Nicely done Kevin. Glad you are getting back to your self again. Thanks for sharing this with us. DW
  10. DWSUDEKUM
    Very nicely done. That came out great. Thanks for sharing this with us. DW
  11. DWSUDEKUM
    I just purchased and set up a Rikon 10-305 10" bandsaw. It is heads above what I was using. So much nicer than the Ryobi that I wore out. The Rikon is made good and solid with very little in the way of plastic. It uses roller bearings for the blade guides and follower. Well worth the $285 paid out for it. I did not get the stand this is a stock photo from Rikon. DW
  12. DWSUDEKUM
    Nicely done Jerry. Thanks for sharing these with us. DW
  13. DWSUDEKUM
    Nicely done. Thanks for sharing this with us. DW
  14. DWSUDEKUM
    Nicely done Ralph. Thanks for sharing this with us. DW
  15. DWSUDEKUM
    Hard at work I see Frank. Those all look great. Thanks for sharing them with us. DW
  16. DWSUDEKUM
    Excellently done Andrew. She is going to love that. Thanks for sharing this with us. DW
  17. DWSUDEKUM
    Nicely done. Thanks for sharing this with us. DW
  18. DWSUDEKUM
    Nicely done. Thanks for sharing this with us. DW
  19. DWSUDEKUM
    Very nicely done Denny. That came out great. Thanks for sharing this with us. DW
  20. DWSUDEKUM
    Nicely done Joe. Thanks for sharing this with us. DW
  21. DWSUDEKUM
    Very nicely done. Thanks for sharing this with us. DW
  22. DWSUDEKUM
    Ahhh....Roly... might want to quietly get that to your customer. Hehe .. Nice work btw. DW
  23. DWSUDEKUM
    Nicely done Gator. Thanks for sharing them with us. DW
  24. DWSUDEKUM
    Nicely done John. Thanks for sharing this with us. DW
  25. DWSUDEKUM
    Love the sign Denny. I know a coffee shop ( Not Starbucks or Duncan Donuts)that that sign would go will in. Thanks for sharing this with us. DW
×
×
  • Create New...