scratcho
-
Posts
59 -
Joined
-
Last visited
Content Type
Store
Profiles
How-To & Articles
Scroll Saw Reviews
Clubs & Organizations
Clubs & Organizations International
Pattern Shop
Suppliers
Village University
Help Desk
Forums
Gallery
eBooks
Everything posted by scratcho
-
Welcome back Paul. Dennis
-
I bought a 20 inch model scrollmaster as a back up saw a few years ago. If you look closely at the tag it says Made in Taiwan. It appears that they had no blower system as mine came with a aquarium pump. Drawbacks are all tensioning is done by knob in the back, tooled blade change, and single speed. Parts look like they will exchange with a single speed Hawk, but I never tried. I paid $60 for mine in like new condition.
-
Pattern by Neptun. 8 1/2 x 11 Baltic birch plywood with a painted Masonite backer. Cut on a DW788 using FD3/0 New spiral blades. Thanks to Neptun for the pattern. I hope you like it. Dennis.
-
Marg; It is an old pattern from one of the magazines. About 10-15 years ago Shelli Robinson was a regular pattern contributor. I have been going through some old patterns. Dennis
-
Daytona Dock; pattern by Shelli Robinson. 1/8" 8 1/2 x 11 birch plywood with a painted backer. Cut on a DW788 using FD NS 3/0 blades. Thanks for looking. Dennis
-
Here is another Stream Engine pattern by Charles Dearing. 1/8 birch ply 8 1/2 x 11. This one is a British Showman`s engine, much fancier than the normal threshers and work engines. They were used to operate carnivals and circuses. There is a large generator up front and they could run rides off of the belt pulley. these engines were usually painted bright colors with lots of polished brass. I hope you like it. Dennis
-
Thank you Spirithorse, I knew somebody here would know the patternmaker. Dennis
-
Guitar Player. 11 x 14 oak plywood with a painted Masonite backer. This pattern is from an old scroll saw magazine. I saved the pattern but not the magazine. There isn`t any designer signature on the pattern. I know I have seen this pattern for sale in a catalog, but I couldn`t find it in The Wooden Teddy Bear. If anyone knows who designed it, let me know so I can give credit. Thanks; Dennis
-
Thanks for the compliments. Dennis
-
Here is the same cutting in birch, backer while cutting. Dennis
-
Just cut one. Did have to glue one piece back. Dennis
-
I cut this for a friend who collects steam engines. Steam Roller pattern by Charles Deering. 1/8 Baltic birch plywood, 8 1/2 x 11. Thanks for looking. Dennis
-
Thanks for all the positive comments. Dennis
-
Trapper or Mountain Man, pattern by The Wooden Wizard (John Hall). 11 x 14 x 1/4 Oak plywood with a painted backer. Cut on a DeWalt 788 using FD 3/0 new spiral blades. Thanks for looking. Dennis
-
Trade top with bottom clamp, trade thumb screw with the set screw. Set screw will usually grip in worn out threads. Dennis
-
A little experiment with light box. Daft Punk, a French techno band that won the grammy award this year. Pattern by spray paint stencils. 8 1/2 x 11 birch. First picture has black backer and frame, the rest were taken in a light box using different filters to change colors. Just playing around, which one do you like best? Thanks for looking. Dennis
-
Welcome aboard; I hope you enjoy the site. There are at least 3 of us from N.E. Ohio here, you, DW and me. Dennis
-
Since it`s been so cold an snowy here, I have been busy cutting. 6 pictures, Andy, Opie, Barney, and Gomer, and Barney and Gomer patterns by Dave Hall, Aunt Bee pattern by Wild Bill, Goober pattern by Old Crow, and Andy at desk and Andy and Barney patterns by Dan. I would like to thank the pattern designers for the patterns. Great job guys. Keep warm. Dennis
-
Thanks for the kind words. Dennis
-
Keefie; The frame is one I use to take photos with. It is from either Walmart or a craft store. Just a cheap wood frame that I added turnbuckles to the back for quick picture changes. Dennis
-
Here`s one for the ladies, Robert Redford and Paul Newman from "Butch Cassidy and the Sundance Kid". Pattern by Dave Hall. 8 1/2 x 11 Baltic Birch plywood. Thanks for looking. Dennis
-
Thanks for the compliments. Dennis
-
Nelson Mandela or "Madiba" pattern by Sue Mey. 8 1/2 x 11 Baltic birch plywood. Cut on a DeWalt 788 using FD 2/0 new spiral blades. I cut right after he died and it has been on display at our senior center. I forgot to take a photo before I put it in the showcase, so I am a little late posting it here. I would like to thank Sue Mey for the free pattern. I hope you like it. Dennis
-
Toothpicks for cleaning up glue squeeze outs. Glue stick for reattaching patterns that come loose. I`ll think of more later. Dennis
-
Looks great Mike. Dennis
