MarylandScroller
-
Posts
28 -
Joined
-
Last visited
Content Type
Store
Profiles
How-To & Articles
Scroll Saw Reviews
Clubs & Organizations
Clubs & Organizations International
Pattern Shop
Suppliers
Village University
Help Desk
Forums
Gallery
eBooks
Everything posted by MarylandScroller
-
Scrollsaw in a Condo/apartment or bedroom?
MarylandScroller replied to MarylandScroller's topic in General Scroll Sawing
I guess I could take up carving and trade in my scrollsaw for a set of carving tools. That would solve the noise and sawdust issues. However, I am more attracted to the wide range of projects available for the scrollsaw. -
Scrollsaw in a Condo/apartment or bedroom?
MarylandScroller replied to MarylandScroller's topic in General Scroll Sawing
I believe that many condos and apartments have concrete subfloors between levels, wheras single-family houses and townhomes do not. The concrete does a much better job of absorbing neighborly noise. Your idea of using a box fan with filter sounds like a great one. I am noise sensitive and running a loud vacuum cleaner while scrolling would take away much of the joy for me. -
I was wondering if anybody does their scrollsawing in an apartment or condo? For a range of reasons, I am considering moving to a smaller home which would not have a dedicated woodworking space but I don't want to give up my scrollsawing hobby. I am trying to decide if it is feasible to do scrollsawing and other small-scale woodworking in a spare bedroom. This bedroom would be sometimes used for guests so sawdust and tool storage are my primary concerns. Does anybody else use their scrollsaw in a condo or apartment, or in a bedroom that is also used for sleeping? -Alan
-
How do they improve your experience? Is it a matter of quicker blade changes, or does the saw actually run smoother in some way?
-
Glad to hear the Pegas clamps will fit my saw. How exactly will the Pegas clamps help me or my saw, if the current Excalibur clamps are still working well?
-
Here are photos of the clamps on my Excalibur saw. I actually purchased these clamps from Seyco about 10 years ago.
-
I was wondering if the Pegas blade chucks would fit an Excalibur EX-19 saw? On Woodcraft, it states that the clamps fit the 16", 21" and 30" saws. There is no mention of the 19" saws. -Alan
-
I was looking at ways to ship a scrollsaw from the East Coast to the West coast and I was surprised how much it would cost. The 50 pound saw was $120 to ship. The separate motor was another $110. I checked with UPS Ground, FedEx Ground and Yellow Freight (YRC). These prices seem awfully high to me. Is there a better way to ship? Is any of this related to the current pandemic situation? I know there are staff (and vehicle) shortages in certain industries. -Alan
-
Yes, I want a pretty, red, Pegas saw. Is that wrong? I could get the King or Seyco saws, which are almost the same saw, but they aren't as pretty (and the Pegas has better blade clamps). I have heard negative things about the Chinese-made Excalibur saws, so they aren't an option either. Come to think of it, maybe I should just keep my old Excalibur saw and invest in a can of red spray paint, if that is important to me
-
Other than footprint, the biggest feature of the new saws which my saw lacks is that on current saws, the upper arm stays up on its own during blade changes. This makes projects with lots of inside cuts easier. It is also much easier to change speed, but I rarely change speeds on my Excalibur.
-
I would do that but apparently the shelf would cost more to build than the saw is worth
-
Actually, it turns out that my saw isn't an EX-19. It is an EX-11, which apparently is an earlier version of the EX-19. It has a 3-position pulley for speed changes.
-
The one in San Diego for $125 appears to be the same model as my saw. The EX-19VS saw in Santa Barbara is similar but has the variable speed. $400 seems quite high for that saw. Thanks for sharing.
-
I was wondering if it is considered safe to operate a propane heater in a garage while scrolling and/or sanding? Obviously, lots of dust is being generated. I don't currently have any dust collection in place. Would an electric heater be safer? I am assuming an plug-in electric heater puts out less heat and costs more to operate then a propane heater. -Alan
-
I wonder if the tilting head design came about when they moved the manufacturing from Canada to Taiwan. Today's 21 inch saw looks essentially like the original EX-21.
-
The EX-19 does have the tilting table. I am not sure when the EX-21, with the tilting table, came out. I do see references to an EX-19VS. Not sure what the difference is between the VS and the regular EX-19 (variable speed?). Mine has variable speed but you need to move a belt to different pulleys to change the speed.
-
If the 21" and 16" saws share the same stand, I guess the footprint would be the same, although the 21" would be 5" deeper. My 19" saw seems somewhat "bulky" because the motor is separate and is located behind the saw, unlike the current designs, and the stand is not meant for the saw. I sometimes need to share my 1-car garage with a car, so space is at a premium. -Alan
-
It is true that Pegas doesn't offer a 16" saw in the US currently. They do have a 16" model, the SCP16CE which they sell in many countries. Bob Duncan, the Pegas (Grobet USA) National Sales Manager, indicated that they are trying to get the rights to sell this saw in the US, so I am hopeful.
-
I am selling the saw because I would like to replace it with a Pegas 16" scroll saw. Its a bit smaller (I no longer have a dedicated shop) and has a few features that my Excalibur doesn't.
-
Thanks for your perspective, Ray! I paid a few hundred for the saw, and then paid $150 for the upgraded Excalibur blade clamps. Sounds like I would be lucky to recover the cost of the clamps. Oh well, things are only worth what somebody is willing to pay for them. Alan
-
I have an Excalibur EX-19 which I purchased used 13 years ago. I updated it with the improved clamps (purchased from Seyco). The saw works well. I would like to sell the saw, but haven't seen any of the EX-19's for sale for quite some time, so I am not sure what the saw is worth. Is there still a market for this saw? It is one of the early ones, built by Sommerville in Canada in 1993. I recall a thread a few years ago in this forum where a was a used EX-19 being sold for $500 and the consensus was that this was way overpriced because parts are no longer available for the EX-19. I am just trying to figure out what a fair price would be for this machine. These machines might be old but are built like tanks and work very well. Alan
