Search the Community
Showing results for tags 'smoothing table'.
Found 1 result
-
Even with a really waxed table, there was too much drag to freely spin my medium sized fretwork pieces around. For those of you that have experienced this on the dw788 table (with the heavy mill marks), you already know what I'm talking about. BM table mill marks (at least on my particular saw) are "sharper"/more pronounced, if that makes sense. Anyway, the drag was unacceptable. This image will give you an idea of the issue. So, I took a trick from the dw788 playbook, and used the same general approach many have done on the 788 to smooth my Hawk table. 1. Got out the random orbital sander, but on the 110 grit, and went over the table.2. Switched to 220 grit and went over the table3. Put a cloth over the end of the sander, and put that sander on steel wool4. Put Mothers Mag and Aluminum Polish on the table, With just a cloth covering the end of the sander, I buffed it several times5. Re-Waxed it. So, did it work? Absolutely. There is very little drag and I can predictably spin the fretwork piece now. Anyway, maybe someone out there will find this helpful, maybe even a 788 owner with aggressive machine marks in their table. -------Randy
