amazingkevin Posted July 9, 2014 Report Posted July 9, 2014 (edited) HERE'S A QUICK 59 MINUTE PROJECT .2"5/8" x 7.5"The little letters were cut with a wore out scroll reverse #3 and the others with a scroll reverse #5 done in solid spruce panels stain grade from the big box store.A 6' piecex12" is 15 bucks wrapped in plastic.This is a Steve good pattern scrollsawworkshop.com Edited July 10, 2014 by amazingkevin Rob Roy, Skeeter, lawson56 and 2 others 5 Quote
Wilson's Woodworking Posted July 9, 2014 Report Posted July 9, 2014 I think your clock is running a little slow there buddy. That would take me all day! Or at least a couple hours. Nice job on it, it looks pretty fragile. Hope you didn't bump it taking it off that perch and break the piece. Quote
amazingkevin Posted July 9, 2014 Author Report Posted July 9, 2014 Thanks DANNY, That though crossed my mind! I took a big chance when i shouldn't have but getting up and down is a chore so i take alot of short cuts Quote
DWSUDEKUM Posted July 10, 2014 Report Posted July 10, 2014 Very nicely done Kevin. Thanks for sharing this with us. DW Quote
jrpeteo Posted July 10, 2014 Report Posted July 10, 2014 Well done Kevin, you are a master! Pete Quote
spirithorse Posted July 10, 2014 Report Posted July 10, 2014 That's amazing, Kevin, or that's AmazingKevin, or well, you get the idea. Great job!Thanks for sharing and God Bless! Spirithorse Quote
lawson56 Posted July 10, 2014 Report Posted July 10, 2014 Love it Kevin,59mins? At least an hour and half for me Top Notch job.Love the Fonts. :thumbs: Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thanks DW,I had to be one my toes with this one, no room for error at all, anywhere. Good for getting my cofidence back scrolling like I used to. Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank you Multitom, good to see you looking around at our work! Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank you DAN for looking! Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank You, PETE, I appreciate the kind words like that always! Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank you SPIRITHORSE, You've been a member since the beginning of SSV I see!Faithful member! Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thanks Bobby! I used to run the Dewalt top speed on most any project.You can only do that when you've scrolled 10 hours a day for two years straight.I knew my absence from the saw would put me back at beginners level .Losing all my dexterity,fluidness,knowledge,ability to hold my arm up.back straight ,the list goes on an on.I'll never be like i was i'm sure .Now i have time to relax in a.c. And a bed!!! :cool: Quote
frankorona Posted July 10, 2014 Report Posted July 10, 2014 Very nice work, looks great, thanks for sharing. Quote
Phantom Scroller Posted July 10, 2014 Report Posted July 10, 2014 Kevin that's a fantastic piece of work, well done you. Roly Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank you Francisco for looking! Quote
amazingkevin Posted July 10, 2014 Author Report Posted July 10, 2014 Thank you ROLY, !!! Fantastic for you to stop and look!!! Quote
amazingkevin Posted July 11, 2014 Author Report Posted July 11, 2014 Thanks Dan .I wasn't sure if I could do this without it breaking, but the spruce held up great for all the thin big letters! Quote
penquin Posted July 12, 2014 Report Posted July 12, 2014 That is super looking, well done. Great job. Thanks for showing it to us. jim penquin Quote
amazingkevin Posted July 12, 2014 Author Report Posted July 12, 2014 Thanks for looking JIM, It was a challenge to do, but I weathered it out ok! Quote
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.