GrampaJim Posted January 31, 2016 Report Posted January 31, 2016 Help! I have a request from a manufacturer to do a portrait type cutting of one of their products. So copyrights are not an issue, since the only copies will be theirs. I have tried my best with Inkscape and Gimp and can't even get close. Here are two versions of the same thing that I was given to work with - a PDF and a JPG. Is this even possible?? Thanks in advance for any and all efforts and help! Also any suggestions are welcome. Jim Prespective 106.pdf Quote
Around the corner Posted February 1, 2016 Report Posted February 1, 2016 Try putting it in Rapid resizer photo, might come out close Quote
multitom Posted February 1, 2016 Report Posted February 1, 2016 Hi Jim, here is my attempt at the machine. ChelCass, bobscroll, DonR and 1 other 4 Quote
Phantom Scroller Posted February 1, 2016 Report Posted February 1, 2016 I couldn't resist it Mahendra great pattern yours. Here's my go. Roly bobscroll 1 Quote
Birchbark Posted February 1, 2016 Report Posted February 1, 2016 Nice patterns guys! I gave this one a try, whew, lots of work... Russell Quote
GrampaJim Posted February 2, 2016 Author Report Posted February 2, 2016 A BIG thank you to Mahendra and Roly!!! These are both GREAT and much appreciated!! Thank you so much! Jim Quote
amazingkevin Posted February 2, 2016 Report Posted February 2, 2016 Hi Jim, here is my attempt at the machine. Hi Jim, here is my attempt at the machine. Perfect work Mahendra! THanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.