Shop made drawer dividers

[Jim Finn]

I decided to upgrade my nuts bolts and screws drawers.  I wanted rounded bottoms so that there were no corners for screws to get stuck in,  I took two 2x4's and two 2x6's clamped them together and drilled where they met using a 2 1/8" forsner bit.  One of five drawers I did this to, is pictured here but I did not take a photo of the garbage can full of wood chips generated by this.

 

 

Edited April 25, 2016 by Jim Finn

[Scrolling Steve]

Now that is pretty unique !....That will work !  

[merlin]

Now thats great Jim.....I like it a lot and may replicate sooooooon..........................

[amazingkevin]

I decided to upgrade my nuts bolts and screws drawers.  I wanted rounded bottoms so that there were no corners for screws to get stuck in,  I took two 2x4's and two 2x6's clamped them together and drilled where they met using a 2 1/8" forsner bit.  One of five drawers I did this to, are pictured here but I did not take a photo of the garbage can full of wood chips generated by this.

 

Drawer dividers.jpg

 

Drilling drawer divisions.jpg

Very interesting way of doing this!

[Ron Johnson]

Great idea Jim. Well done. Time consuming organizing but comes a time it needs to be done. At the end you'll be glad you've done this.

[Phantom Scroller]

Jim I know about dam screws in the corners that's a great idea to solve the issue.    Roly

[Montserrat]

Showed it to my hubby and he really liked the idea. 

[Dave Monk]

Great idea! dave