gilljc Posted February 21, 2020 Report Posted February 21, 2020 A little while ago I made a little box with a Vulcan on it adapted from a pattern I found here. A friend liked it, and asked me if I could make one with a Nimrod on it ( they used to fly from our local base until they were retired) I wonder if anyone could make me a simple pattern that I could cut into a small box lid, the box will be roughly 5 inches by 7 or 8 inches similar to the one in the attached photo. Thank you, Gill Quote
ChelCass Posted February 22, 2020 Report Posted February 22, 2020 Hey Guys and gals, This gentlemen is a member of another scrollsaw group I belong to. I suggested to him that he come over here and ask if one of our pattern makers could possibly make him a simple pattern of this plane. I explained to him that he would need to post a picture here of the finished cut for us to view. How about it ? Can someone do up a simple pattern for him. Thanks Chelcass gilljc and Birchbark 1 1 Quote
gilljc Posted February 22, 2020 Author Report Posted February 22, 2020 Thanks for the boost Chelcass PS, I'm a gal... Gill ChelCass 1 Quote
multitom Posted February 23, 2020 Report Posted February 23, 2020 Okay boss we will give it a try . ChelCass 1 Quote
Birchbark Posted February 23, 2020 Report Posted February 23, 2020 (edited) Wouldn't load my image for some reason. Edited February 23, 2020 by Birchbark Had to retry Quote
Birchbark Posted February 23, 2020 Report Posted February 23, 2020 This is the best i could do for you Gill, hope it helps. Maybe some others will jump in and you'll have a selection to choose from. Hope you'll come back and post a picture of the finished project for us. Russell gilljc, multitom, Scrolling Steve and 2 others 4 1 Quote
ChelCass Posted February 23, 2020 Report Posted February 23, 2020 21 hours ago, gilljc said: Thanks for the boost Chelcass PS, I'm a gal... Gill Oops! Sorry, me too...…………….a gal that is, multitom and gilljc 2 Quote
ChelCass Posted February 23, 2020 Report Posted February 23, 2020 10 hours ago, multitom said: Okay boss we will give it a try . Mahendra you are so funny. lol Thank you for giving it a shot. multitom 1 Quote
ChelCass Posted February 23, 2020 Report Posted February 23, 2020 29 minutes ago, Birchbark said: This is the best i could do for you Gill, hope it helps. Maybe some others will jump in and you'll have a selection to choose from. Hope you'll come back and post a picture of the finished project for us. Russell Thanks Russ, I told Gill *she* needed to come back and post a picture. Birchbark 1 Quote
gilljc Posted February 23, 2020 Author Report Posted February 23, 2020 Thank you everyone, and huge thanks to Russel, very much appreciate it, it looks great. I'll give it a go very soon and post a pic Gill Birchbark, multitom and ChelCass 2 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.