Joey Posted April 7, 2011 Report Posted April 7, 2011 Hi, Do any of out there have a fix for this dust blower hose on the Dewalt S/S? It will not stay in place and always end up on the pattern being cut and in the way. The knuckles are warn is what I think. Thanks for listening. Joey Does this forum have a spell ckecker? Quote
wombatie Posted April 8, 2011 Report Posted April 8, 2011 Joey, when my DeWalt hose starts to droop I just give it a hard push into the machine and give it a twist and its usually fine for about 12 months. As for the spell checker, go to Coffee House and find Question For Travis, it explains what spell checkers you can use. Hope these answers of been of help. Marg Quote
Joey Posted April 8, 2011 Author Report Posted April 8, 2011 Marg, Thanks for the tips, I will give them a try. Joey Quote
Lucky2 Posted May 5, 2011 Report Posted May 5, 2011 Joey, most people don't worry about their spelling as long as they get their point acrossed. As long as they know that people know what they were asking for, they're satisfied. Len Quote
kardar2 Posted May 7, 2011 Report Posted May 7, 2011 If you still having trouble with blower hose take a stiff piece of wire like coat hanger and fasten it to the hose. Sent from my DROIDX using Tapatalk Quote
Joey Posted May 7, 2011 Author Report Posted May 7, 2011 Kardar2 Thanks for the tip. What I did was,I removed the bad section put put the hose back together, works just like new. Joey Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.