Jump to content

Huntter2022

Member
 View Profile  See their activity

  • Posts

    518

  • Joined

  • Last visited

 Content Type 

Everything posted by Huntter2022

  1. Huntter2022
    Rit dye has been used and awhile ago there was a article in SSWC on it
  2. Huntter2022
    He got in trouble over copyrights and after this alot designers the magazines all redid how the deal with patterns just like the forums that have Free patterns Good sites have been shut down because of this all it takes is one
  3. Huntter2022
    That looks great As it rocks does it play "you think my tractors sexy" sure someone will buy that for there child and have it for along time
  4. Huntter2022
    That heat is a killer . Slow down I know there is not enough hours in the day ,but if you don't in this hot weather you won't need any hours .I have a small dorm refrig I keep some bottle water in it I find if it is there close and I don't have to leave the garage I'll drink it more often
  5. Huntter2022
    the only problem with reverseing the blade . You will notice that it is harder to stay on line take it slow and you will be ok or use a sprial blade if you have not used one before I would pratice some before I would start on a big piece with them.
  6. Huntter2022
    Kool rocking bull thanks for sharing it with us i wish you the best of luck on your sales David
  7. Huntter2022
    For fuzzies Dans ideal is great I clamp old board behind my cutting this prevents any black smoke from getting on the front of the cutting Flutter wheels also known as star ,mops and a few other names they come in http://www.woodcraft.com/Family/2000266 ... Stars.aspx http://www.rjrstudios.com/Merchant2/mer ... ry_Code=MP David
  8. Huntter2022
    They have sanding strips that you install in the saw I have not used them but they seem like they should work
  9. Huntter2022
    Good old teflon tape
  10. Huntter2022
    That is great Make sure you use wax without silcone in it
  11. Huntter2022
    Hi Bobby ! I been around here and other forums and when you think you done or tried everthing with a scrollsaw someone comes up with something new. WElcome abroad
  12. Huntter2022
    Malc Depending on how big they are You can use a circle cutter http://www.woodcraft.com/Search/Search. ... e%20cutter
  13. Huntter2022
    here is a nice plan http://1nailbender.tripod.com/full.htm
  14. Huntter2022
    Billie if you click on the photo it will enlarge Welcome to the village
  15. Huntter2022
    Hi Shane What part of the southern tiers are you in ? I'm from Brockport ,NY welcome back to a fun hobby have any question don't be shy ask
  16. Huntter2022
    Do not sell anything like NFL , Walt Disney , Nascar , NBA and etc. stuff like this will get you in trouble . I know you will probably see people selling it but I have also seen people get in trouble selling Walt Disney lawn ornaments. They are out there all the time another one is Harley Davidson they offer a reward if you turn someone in selling there logo or copyrighted material . Yes you can get a licences to sell it but from what I heard it is expensive to get
  17. Huntter2022
    Great ideal , and could also save ya money thanks for sharing it with us
  18. Huntter2022
    Congratulation Scrolldad! Now we should be seeing some more clocks from you in the future
  19. Huntter2022
    Check out Frank at Pozsgai's Designs he has Scroll Saw Retrofit Items If your not sure which one contact him http://www.pozsgaidesigns.com/page0006.htm hope that helps ya out. David
  20. Huntter2022
    Mike I have a propane heater in my garage and does well I use the 20lb tank which I picked up a couple extra during spring clean -up . http://www.mrheater.com/product.aspx?catid=42&id=21 Also have which use for emergency heat just in case power goes out or to get the chill off inside you don't get the odor like of kerosene http://www.mrheater.com/product.aspx?catid=41&id=116 Works great had to buy the adapter for the bigger tank has a automatic shut off if you tip it works great too
  21. Huntter2022
    Hi Mike ! Last year you mention at the show you were going to start a group glad it is going good David
  22. Huntter2022
    All have gave great advice But burning can be caused by cutting to fast you can add packing tape to help lubricate the blade
  23. Huntter2022
    I sand my board then put blue painter on it then glue my pattern on fine it removes easy then
  24. Huntter2022
    here is my patten of a Chiropractic Clock Please check the hole for the clock before cutting if you do not drill it
  25. Huntter2022
    HeheheHahaha like this
×
×
  • Create New...