amazingkevin

Now again who would have thought to just remove enough wood to show the grain plus show the age of the wheatherd wood..Tips and tricks again,somebody writeing this all down yet?

they are nice and the wood is great looking to!

very good lookin work.i was in loews parking lot and bumped a bumper backing in .a customer told me jeff Gordon wouldn't do that .finally I get to see who jeff Gordon is .I had no idea as I don't do sports!

urecka sazam wowy zowey You clubers are makin my head way to fat.this is better than going to the doctors to feel better.I'm in lala land when I read your wonderful comments your the best bestbest

who ah this is super ,my hair is standing in excitement from all the newbees commenting on my practice pieces,lolThe more the merrier!Thanks everyone!

i casted my vote!Click on eneral scroll sawing and scroll down to older posts till you see the green dash openit up and cast your vote for the poll on the chat room.

i'll be right here and am excited to see someones most difficult piece to date they've done.glad to have you as the newest member back again..Welcome again

I've lurked on the net so much try to find a way to make $ with the scroll saw put never even got close.Was praying today and about an hour later my friend brings in the owner of the building and occupant of the bay next to my friends.he does religous stuff.Well he looked at some of my work on the table chock full of dust and asked if i could cut composite .i admited i did'nt know what that was so he whent back to his shop mand produced some i believ corian 3/8" and 1/2".he said if you can cut this i have work for you .i asked if the work was small items he said yes.jesus fish angles crosses words.He left and i nibbled on a corner to see if the #7 scrollreverse blade would even touch it.To my amazement id not only cut it it left it baby butt smooth.ugreeka i down loaded the jesus fish and a few other things cut them and brought them over and left them with a young man as the man was busy..Time will tell but this has been the best prospect in 7 years.The last one is mdf but if he has thin corian i can cut the god is great god is good napkin holder to for him.hope i pass the test!the napkin holder is mdf 1/4" stacked

They are all exquisive work to see,i would not even attempt to try the first one ,it's even hypnotic to look at let alone scroll.but it was a piece of cake for you looking at the rest of your works!Very very proffessionaly done pieces.Great choices too.so happy to have your tallant on board! the last one is marvelously smooth cut free style letters,i cringe to do letters like that.That v.w. bus is full of life yet ,no rust i can see,lol It is beautyful to see done so nice .No paitience for mthe windmill in me.thats a work of art like the effels tower.Your a dedicated scroll i can see.Ol floppy ears is packed full of muscle,and not a wrinkle out of place.Should you set up a craft show somewhere there will be a croud of customers bidding on your majestic treasures.Can't wait to see what you wow us with next thanks for the showing!

Yes sir it cuts but slower and the blade gets alot hotter which shortens it's life plus you have to smell fiberglass.I have'nt been able to use the dewalt above 5 on the speed control. but recently took it all apart and used valvoline synthetic on all the bearing i could get to.one bearing was real bad and there was no way of me pressing it out to grease so the squeeky wheel got none.but now moths later i need the high speed to cut the mica an 3/4 ply faster so i tryed it on high speed .before the grease job anything above 5 it would knock.now on speed 8 it's very quite and no knock.Steve good says he does all his cutting on speed #8.

this ones done on 3/4 plywood with thick fancy formica on top.took 43 minutes on the dewalt at warp speed of 8 wide open.with a scroll reverse #7 and a scroll reverse #1 only because i'm out of differant size bits I wanted to use a 5 but no drill bit,10.75" tall and 8 " wide.i think this was a sue mey.com pattern.Not sure if it will go on a wall or stand.Thanks for looking

thanks group! another one coming this morning too,hang on!

Well I said i'd try it and I did it.no less than 80 holes in 1/8" maysonite done with a number 3 scrollreverse blade from mikesworkshop.com this baby went fast as it took 43 minutes on the dewalt with the speed set down to 2.5 so I could control it.I had lots of fun cutting him as he was smiling at me while I cut him up ,lol the Masonite was white on one side 11" x 8" enlarged with the amazing "rapidresizer.com "program by Patrick. roberts

that is fabulous ! the oak and walnut set each other off smartly .real nifty saw blade.

Very good job of patterning.Looks like a short bed.when the spots around the lights and grill get to be to tricky ,just fatten them up a little and you'll be ok.Travis's Cadillac was like that and took me days ,a little at a time as I was afraid of breaking thru the complex grill .

Were here for you,your going to be a great asset to the club!

Welcome aboard!You'll have a great time here meeting new and old friends .any questions? we can help !your problems are are problems.We'll steer you clear and save you plenty of time not making mistakes we've already made.So grab a cup of coffee ,were here to help.glad to have you as a member!

howdy to ya'll,you new here?lol Hows your scrolling life.what kind of saw do you use .there's lots of friendly ,helpful friends here for you to meet.Any help you'll ever need is just a click of the mouse away.We can help you with scroll saw repairs that you can do yourself,direct you to the pattern your trying to find,open your very own gallery here to save pictures ,patterns ,etc.glad to have you on board for the long haul.check in to the forum often as there is a world of information in it just for you.welcome again,ENJOY!

terrific lookin intarsia, lots of dedicated quality work went into this one,good job sir!

interesting the little tricks the ssv can do ,travis is amazing!

I don't know about a link but once your in the pattern spot then you chose which catagorie and then click on the catagoie word it's self I was there yesterday and the day before but couldn't open it up?

wow a whole club just joined ours and probabley doubled the active members WHOAH!I'm going to have to get a seat belt for my scroll saw now!

I enjoy your nthoughts on lots of electric receptals that's a plus!Make a sign no women allowed lol,How reat and wonderfull it is to be able to make exactly what you need and want.Your work is right up to and past the code.

at this time i'museing Norton and no issues either

just a little something to keep the rust off the saw blade,spent the day on the computer.