Denny Knappen
-
Posts
6,011 -
Joined
-
Last visited
-
Days Won
51
Content Type
Store
Profiles
How-To & Articles
Scroll Saw Reviews
Clubs & Organizations
Clubs & Organizations International
Pattern Shop
Suppliers
Village University
Help Desk
Forums
Gallery
eBooks
Everything posted by Denny Knappen
-
Thanks Marg. I like it as a wall hanger.
-
Thanks Paul. Charles Hand commented that this design was made for the wife on their 10 year anniversary.
-
Thanks Bobby
-
Thanks Rodney. Pegas sales slowed down quite a bit lately.
-
Thanks
-
Thanks Rodney. Fun to cut.
-
Thanks Bob. The finish is easy. Just dip in the sanding sealer.
-
The Teddy Bear pattern.
-
Thanks Dick. Another one is in the works.
-
Thanks Dick.
-
Thanks for the great design.
-
Thanks Pete. Actually, going to be a gift for Dianne.
-
Thanks Don.
-
Question #1 I dilute with denatured alcohol 50%. Looks like Don answered your second question.
-
Thanks Roly
-
Thanks Barb. I wonder what it would be like to cut as a coaster!
-
Thanks Bob. I picked one of the easier ones in his book.
-
Thanks. A fun one to cut.
-
Normally I would use a #3R MGT blade, but I wanted to see how the #1R MGT blade performed. I went through three blades on this project.
-
I stock many sizes, but not all. I have Mascot #60, #63, and #68 on closeout at $5.08 per tube of 10.
-
Heart Coaster finished Monday, August 22, 2022. The pattern is by Charles Hand and found in the book "Circular Scroll Saw Designs". I enlarged the pattern so that it is a trivet or wall hanger. I used 3/4" Hard Maple about 8" x 8". Cut on the Pegas scroll saw using Pegas #1R MGT blades. I used #1R MGT blades to see how they would cut 3/4" Hard Maple. Very impressed. After sanding with a Mac Mop, dipped in diluted Shellac and lightly sanded again. Two coats of MinWax Lacquer clear gloss. Comments welcome.
- 31 replies
-
- 18
-
-
-
Border Collie and Sheep finished Monday, August 22, 2022. The pattern is by Jaeheon Yun and found in the book "20 Minute Scroll Saw Puzzles". I used 3/4" Poplar about 8" x 12". Cut on the Pegas scroll saw using Pegas #5R MGT blades. After sanding with a Mac Mop, dipped in diluted Shellac and lightly sanded again. Comments welcome.
- 14 replies
-
- 19
-
-
-
Hi Dave. I received an email from Ocooch Hardwoods that they now have stock. A 1/8" 12" x 12" is $1.68 plus shipping. Nt sure how this compares. I use Ocooch all the time.
-
I also use the Mac Mop on almost every project. This is the one I use, and I notice it is on sale. Klingspor Abrasives Spindle Mounted Mac Mop, 80 Grit 7"x 2"x 1/4" Spindle (woodworkingshop.com)
-
For the first, looks real good. A suggestion, keep your first project in your shop and watch your progress as you scroll through life.
