Jump to content

Woodrush

Member
 View Profile  See their activity

  • Posts

    865

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by Woodrush

  1. Woodrush
    I've never used it. Even when I first started I tried it once then threw it in the garbage
  2. Woodrush
    I still have a porter cable that I gave to my son and we use as a back up saw to cut hardwood and it's still kicking after almost 3years. I had to change the tensioner bolt after little use. I replaced it with a machine grade bolt and no more issues.the motor gets a little erratic after a while but it calm out when it warms up.
  3. Woodrush
    My dewalt does the same. I've learned to live with it
  4. Woodrush
    I bought some gross of 5 and 3 from BW and mine have a notch at the end of the blade which I've never seen with pegas before. I've been using them for about 2 years. I thought it was a new design for installing the blade properly
  5. Woodrush
    Throw the table insert in the garbage and make one out of wood.the inserts are a common problem on those saws
  6. Woodrush
    Mine did this from day one as well I found it doesn't like cold. When it warms turn it slowly to high and let it run for about 3 minutes. I also put some machine oil in the pivots. The Asian plants dont lubricate them enough
  7. Woodrush
    Great idea. I’m sick of applying then cleaning fine freyworkfretwork
  8. Woodrush
    Looks like a good sturdy saw
  9. Woodrush
    I use the mr heater mh80. It heats 1900 sq feet. Is very quiet and you can get almost 20 hours from a bbq propane cylinder.ive had 2 of them and they work great
  10. Woodrush
    I dont think so. Did you try Mike's tools. He has delta parts
  11. Woodrush
    Check king Canada as they are the same saw. You might luck out with the part. I have a 10 inch delta and my buddy has a 10 inch king. They are identical except for the in off swith
  12. Woodrush
    Nice job Ray. Cant wait to see finished project
  13. Woodrush
    I cut better counter clockwise as well
  14. Woodrush
    I try to drill them all but I dont think I have ever done that as I always miss at least 2 or more
  15. Woodrush
    Nice work
  16. Woodrush
    Looks like my delta
  17. Woodrush
    Does anyone know what the lowest operating temperature for the dewalt . My shop gets as cold as -20. My porter cable I'd not like extreme cold
  18. Woodrush
    Very nice job
  19. Woodrush
    It helps me relieve stress
  20. Woodrush
    Tightened the pivot bolt slightly and arm goes up and down with very little resistance
  21. Woodrush
    Try the 67 Camaro on Steve Goods sight
  22. Woodrush
    Nicely done
  23. Woodrush
    What would the hobby be without the pattern maker's.
  24. Woodrush
    I had the same issue with a dozen Olsen 2/0 blades. Frustrating, but not much you can do about it
  25. Woodrush
    I was working in toronto at that time at a car dealership and the whole place stopped dead when we heard the news. We had 60 or more people crammed in the customer lounge watching the tv. I hope to never see something like it again
×
×
  • Create New...