Young_Scroller Posted August 4, 2015 Report Posted August 4, 2015 Hi everyone, a friend of mine asked me if I could make him an avengers "A" the logo and I was wondering how i should go about this, my biggest concern was how to address the floater piece in it, if I should put a backer on it or i should just connect it to the piece, I appreciate any suggestions, thanks! -Joe Quote
DonR Posted August 4, 2015 Report Posted August 4, 2015 (edited) Here is how I would handle it. Good luck with it. Don R Edited August 4, 2015 by Travis removed pattern wombatie 1 Quote
amazingkevin Posted August 4, 2015 Report Posted August 4, 2015 Looks the same to me or am i missing something again Quote
kywoodmaster Posted August 4, 2015 Report Posted August 4, 2015 First one is positive cut away the waste and you have the symbol left as a stand alone. Second one is negitive cut away the symbol and you have a stencil efect to be used with a backer. At least thats the way it looks to me. Quote
Scrolling Steve Posted August 4, 2015 Report Posted August 4, 2015 First one is positive cut away the waste and you have the symbol left as a stand alone. Second one is negitive cut away the symbol and you have a stencil efect to be used with a backer. At least thats the way it looks to me. Don R comes thru again! Quote
Phantom Scroller Posted August 4, 2015 Report Posted August 4, 2015 Yes Don did good on the first one attached to a stand. Roly Quote
Travis Posted August 4, 2015 Report Posted August 4, 2015 I removed the pattern. The Avenger's logo is a copyrighted image owned by Di$ney and we can't distribute them. Thanks for understanding. oneleggimp 1 Quote
DonR Posted August 5, 2015 Report Posted August 5, 2015 oops, Sorry!! I should have known better. Don R Bfreeman 1 Quote
Young_Scroller Posted August 5, 2015 Author Report Posted August 5, 2015 sorry about that, I am not familiar with copyright laws. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.