Dragon Clock

[olddust1]

This was cut from a piece of flooring.

Check with your local flooring company and you might be able to get some good scraps.

 

If you have a Lumber Liquidator nearby watch for their sales and you can  find some 12 X 12 for under $1,

 

John

 

Old Dust

 

 

[Denny Knappen]

Well done, John.  We can find wood almost anywhere.

[meflick]

Clock looks great.  Thanks for sharing your photo and information on a great source of wood possibilities.

[Scrolling Steve]

Looks good John !... Thanks for the tip.

[GPscroller]

Looks  good!  Thanks for the pic.

 

Jeff

[Lucky2]

Nice looking clock John, I used to get 5"x5' sheets of this stuff from the bottom and top of the bundles of flooring. The stuff was was east enough to work with, but, man o man it was hard on blades.

Len

[Ron Johnson]

Very well done John. Like the dragon pattern.

[penquin]

That is one good looking cut.  love the dragon and design of the project.  That design could be used for a number of different items.  Is the pattern available some where?  Thanks for posting

jim

penquin

[frankorona]

Great job, very nice.        

[amazingkevin]

Nice looking clock John, I used to get 5"x5' sheets of this stuff from the bottom and top of the bundles of flooring. The stuff was was east enough to work with, but, man o man it was hard on blades.

Len

Len ,in my experience with wood flooring's is .i think they kind of make them water proof with by adding sand in the mix.My 4'-4.5 carbide saw blades don't last at all an you can see sparks coming off the blade I don't cut wood floor pieces any more as your correct in that they eat up the blades quick.

[newfie]

Nice cutting thanks for sharing

[wombatie]

Nice looking piece John.  Well done.

 

Marg