scroller 665 Posted January 19, 2011 Report Posted January 19, 2011 hello guys the bellows on my saw went out the other night and did not know what to do so i thought about it and we just did our bath room i took the fan and little oil and a cover over the air side two holes for my hoses now i run my two saws from it close one off and let me tell you this keeps my wood clear wile cutting try it and see gary Quote
mikesscrollsaw Posted January 19, 2011 Report Posted January 19, 2011 Can you post a picture if it? I cant visualize what you mean When mine went out i hooked my compressor up to the air tube and turned the regulator way down low. It constantly blew air, and much better than the bellows. Quote
amazingkevin Posted January 19, 2011 Report Posted January 19, 2011 i have an refridgerator condensor cooling fan sitting on the drill press and another fan behind me and the a.c. vent next to me.No dust goes in my nose!The dust you do see is the heavy dust ,there's no fine dust mixed in it .Anything that floats the a.c.filter catchs.i never sneeze or smell wood Quote
mikesscrollsaw Posted January 19, 2011 Report Posted January 19, 2011 I use two 20 inch fans, one with a 1 inch filter to collect the fine particles. Seems to work really well Quote
Oges Posted January 20, 2011 Report Posted January 20, 2011 A member of the scrollsaw club that im in has part of an old hairdressers hairdryer (the type that goes over your head i imagine), its rather quiet and blows away the dust well ... the bonus is that he can adjust the heat setting on those cold days so it warms his fingers as he saws Quote
Pixman Posted January 20, 2011 Report Posted January 20, 2011 I have a long hose to my dust extractor. The end of the hose runs alongside the arm of my saw and is held in place while I use it by some wrap around strips of Velcro. My bellows are still OK so the dust is blown off the blade and goes straight up the hose and away. There's virtually no dust to worry about. Trust me ... I'm an asthmatic! If your bellows pump gives up don't forget that a good option is an aquarium pump to keep the blade clear. Magic Quote
qlty Posted January 29, 2011 Report Posted January 29, 2011 I took a muffin fan out of an old puter used heavy copper wire to fasten it to saw and be adjustable its very quiet and does the job. Quote
Old Dust Posted January 30, 2011 Report Posted January 30, 2011 I just went to the pet store and bought an aquarium air pump. (20 gal size) It works great. John Old Dust Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.