From the Coffee House

[TAIrving]

Update: I have been informed that this image is for sale elsewhere.  Thus I withdraw my request for a pattern of this image.  I respect the rights of others to the images they have created.  

This one was posted in the Coffee House this morning by Jerry, aka Jerry1939.  It caught my fancy and I was going to cut it but it is not in the form of a pattern.  Could someone make a pattern of this please?  Embellishments encouraged.

I can do word art but don't have the fancy fonts and I have no clue about how to do the halo.

Jerry, thanks for the fun post; may we have your permission to do this one?

Thanks, 

Thurman, aka Algae

 

Edited January 21, 2021 by Algae
withdraw the request in respect of another's property rights.

[spirithorse]

Hi, Alga,

I just added bridges to the letters and, since I am slow, I did not clean up all the fence board look in the background.
Just cut the black and add a backer and you should be all set.
Let me know if that is not what you envisioned.

God Bless! Spirithorse

 

Edited January 20, 2021 by spirithorse
May Be a copyrighted image

[don in brooklin on]

That sign was originally designed for a vinyl cutter like a Circut machine for either T-Shirts or to apply to wood.

If you are going to cut into wood do as Spirithorse suggests or if you are going to apply to the backer cut and apply to the wood directly, just take image and resize and cut out.

You can also buy the svg at Hold my Halo svg . Pretty cheap $3.50 cdn so I guess it is $2.50 us.

 

 

Edited January 18, 2021 by don in brooklin on

[TAIrving]

Thanks Bob and Don.  As it is offered for sale on Etsy I will assume it is their property and will buy the pattern.  

I am still trying to decide if I will do this one and what wood might work best. 

[don in brooklin on]

Take a look at this post.  1/8 BB and pallet wood.  Bead board would work too.

https://www.scrollsawvillage.com/forums/topic/41414-name-plaque-for-my-daughters-co-worker/?tab=comments#comment-450127

[amazingkevin]

I found that treating other people like they treat me is that they cry victim

 

[spirithorse]

On 1/18/2021 at 6:50 AM, don in brooklin on said:

That sign was originally designed for a vinyl cutter like a Circut machine for either T-Shirts or to apply to wood.

If you are going to cut into wood do as Spirithorse suggests or if you are going to apply to the backer cut and apply to the wood directly, just take image and resize and cut out.

You can also buy the svg at Hold my Halo svg . Pretty cheap $3.50 cdn so I guess it is $2.50 us.

 

 

Thanks, @don in brooklin on

I wanted to help out when I thought I could and did not give any thought to where the image
came from except from the Coffee House.  Since it may be copyrighted, I removed my post.
God Bless! Spirithorse

[TAIrving]

Thank you all for your suggestions.

I do not wish to infringe on anyone's rights to this image or any other image for that matter.  And so I withdraw my request for a pattern of this image.  

 

[Birchbark]

On 1/14/2021 at 7:07 PM, Algae said:

Update: I have been informed that this image is for sale elsewhere.  Thus I withdraw my request for a pattern of this image.  I respect the rights of others to the images they have created.  

This one was posted in the Coffee House this morning by Jerry, aka Jerry1939.  It caught my fancy and I was going to cut it but it is not in the form of a pattern.  Could someone make a pattern of this please?  Embellishments encouraged.

I can do word art but don't have the fancy fonts and I have no clue about how to do the halo.

Jerry, thanks for the fun post; may we have your permission to do this one?

Thanks, 

Thurman, aka Algae

 

There is no threat of a copyright infringement on this.  Not sure why anyone would think that.  It's no different than any of the many memes you see all over the net.

Here's my version of the humorous saying.

Russell

 

[spirithorse]

Nice work, Roly!
Thanks for helping out and God Bless! Spirithorse

[Birchbark]

2 hours ago, spirithorse said:

Nice work, Roly!
Thanks for helping out and God Bless! Spirithorse

I've been a contributing member here for 10 yrs.  With a member reputation of 3,500.  I sign each post with my name.  As I explained to you here, https://www.scrollsawvillage.com/forums/topic/40526-cowgirl-barrel-racer-my-grand-daughters-wish-help/      My name is still Russell.

Roly is a great guy, he lives in Great Britain, I live in U.S.A.  I hope he's not upset with you getting our names confused.

Russell

 

[spirithorse]

OH, I am so sorry!
I don't know why I have made that mistake again.
I sincerely apologize. You are a great guy also, Russell, and
i appreciate all the requests you help with and all the other
patterns you share.

God Bless! Spirithorse

[spirithorse]

@Algae

I wanted to tag you in this thread to make sure you saw that Birchbark made you another pattern.
God Bless! Spirithorse

[flarud]

On 1/18/2021 at 9:12 AM, don in brooklin on said:

Take a look at this post.  1/8 BB and pallet wood.  Bead board would work too.

https://www.scrollsawvillage.com/forums/topic/41414-name-plaque-for-my-daughters-co-worker/?tab=comments#comment-450127

Thanks for the free publicity Don!  LOL  My wife used the same font for a Cricut pattern that you used for my sign.  It is a very nice font.