Popular Post Hawk Posted June 23, 2025 Popular Post Report Posted June 23, 2025 (edited) Well, another attempt at a resin pour with a scrollsaw pattern. This is a pattern from @alexfox which I took some liberties with. the "copper" color frame is ⅛ ply and the backer is ⅛ clear acrylic. Now the resin on the first pour I really missed the pitch with the color, i didn't add near enough dye for the color and it came out nearly clear, except for the orange. Turns out I didn't have any orange dye, I really should have checked to see if I had orange dye before starting the pouring process (lol). So I grabbed the orange mica powder I had for that. After everything cured I added another layer to every color except orange. The first yellow was too dark so eased up on the second. All in all a real learning experience and a reminder to be prepped properly next time. Edited June 23, 2025 by Hawk Scrappile, barb.j.enders, JackJones and 15 others 18 Quote
heppnerguy Posted June 26, 2025 Report Posted June 26, 2025 quite the project. That one took a lot of work and it was sure worth it. Dick heppnerguy Hawk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.