Wichman Posted January 28 Report Posted January 28 After looking at the way I had my house and indoor shop configured, I decided to move things around a bit (a lot). Some pictures of the work in progress. I finally mounted the Hegner to the miter saw stand. The thing I paid the most attention to was the center of balance; when I unbolted the saw from the factory stand, I slid a dowel under the saw and marked where the center of balance was on the saw, then I made sure the COB was centered on the stand. There is enough space on either side to mount the other two saws I have. Utilizing the stand allows me to make my equipment more modular and flexible. I've found that my larger shopvac is much less annoying than the smaller one, so I can have it running while cutting. The clock on the left tracks the time the saw runs (it's connected to the foot switch); the clock on the right tracks how long a project takes to cut Scrappile, barb.j.enders, OCtoolguy and 3 others 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.