DWSUDEKUM Posted June 16, 2015 Report Posted June 16, 2015 Pine and Mahogany 5 lobe bowl Cut from a 1 inch thick pine and mahogany blank. The bowl was sealed and finished with wipe on polyurethane. Black Walnut, Cedar, and Pine planter Cut from a piece of Black Walnut with 3 inserts of Pine and Cedar. This planter was sealed and finished with Spar Varnish. Mini Alarm Clock Cut from Mahogany. Sealed and finished with shellac. This is a Steve Good pattern. An excellent way to use up small scraps. Bamboo Name Plate 4 inches wide x 15 inches long x 10mm thick. Sealed and finished with spar varnish, Mini Car Made from the inside sections from my banks. The car with exception of the axles are made totally from scrap and have been finished in a beeswax and mineral oil mix. Simple shell Cut from pine. Finished with beeswax and mineral oil mix, Compound Cut Donkey / Elephant Cut from pine. Both the donkey and elephant are part of one cutting. Viewed one way - Elephant, Viewed the other way Donkey. Compound Cut Ballerina / Swan Cut from pine. Both the Swan and the Ballerina are part of one cutting. Viewed one way - Swan. Viewed the other way - Ballerina. Gravity Wine bottle holder Cut from cedar. The pattern for the grape vine is from a 2007 issue of SSWC. Finished with shellac. DW bobscroll, Bishop, New Guy and 1 other 4 Quote
heppnerguy Posted June 16, 2015 Report Posted June 16, 2015 Nice work. I especially like your bowl. Did you glue the woods together before you cut the pattern? Your idea and skill are perfect Dick Heppnerguy Quote
dgman Posted June 16, 2015 Report Posted June 16, 2015 All very nice work DW! I've made tons of those mini alarm clocks. I tie a ribbon to the top and sell them as Christmas ornaments. They are great sellers! Quote
DWSUDEKUM Posted June 16, 2015 Author Report Posted June 16, 2015 Nice work. I especially like your bowl. Did you glue the woods together before you cut the pattern? Your idea and skill are perfect Dick Heppnerguy Dick for the bowls blank I took a 3/4 in thick piece of white pine and glued a layer of 1/4 mahogany on top. I cut the pattern for the bowl with the mahogany side down and then glued them together. The pattern I made from the Scroll Mania website - http://www.scrollmania.com/polydraw.html DW heppnerguy 1 Quote
wombatie Posted June 16, 2015 Report Posted June 16, 2015 WOW. Everything is amazing. My Favorite is the walnut and pine planter. All should sell well. Marg Quote
lawson56 Posted June 16, 2015 Report Posted June 16, 2015 WOW! They are some Mighty Fine cuttings.Love the Bowls.The Simple Shell is Awesome! :thumbs: Quote
Scrolling Steve Posted June 16, 2015 Report Posted June 16, 2015 Excellent work, DW.....Love the bowls!.....You should have a great show....Good luck! Quote
Gordster Posted June 16, 2015 Report Posted June 16, 2015 Very nice DW ,the compound figures have my attention.. The wine holder too,I have to make one to try Your name sign came out nice The Adlers will love it. Hope you have a fantastic show.. Quote
frankorona Posted June 16, 2015 Report Posted June 16, 2015 Excellent job, very well done, I really like 3d figures. Quote
Scrappile Posted June 16, 2015 Report Posted June 16, 2015 Great stuff! I love the compound cuts that create two items. The ballerina/swan will make some little lady very happy. My wife has been after me to try to make on of the sea shells. All very nice. Quote
edward Posted June 16, 2015 Report Posted June 16, 2015 Very nice items, and good cutting, should be good sellers. edward Quote
bobscroll Posted June 16, 2015 Report Posted June 16, 2015 Very nice work you've been doing DW, Thank you for the photo's, Bob Quote
penquin Posted June 16, 2015 Report Posted June 16, 2015 WOW you should knock them dead at the show with all those great looking projects. Well done, good sales at the show hope it goes well for you. jim penquin Quote
rdatelle Posted June 16, 2015 Report Posted June 16, 2015 Everything is great. You always do great work DW. I love the Swan/ballerina. How do you even get a pattern for that. Quote
DWSUDEKUM Posted June 16, 2015 Author Report Posted June 16, 2015 Everything is great. You always do great work DW. I love the Swan/ballerina. How do you even get a pattern for that. That Swan / Ballerina pattern came out of one of Fox Chapel Publishing books. My memory is poor for which one but I THINK it is out of the book 128 Compound Scroll Saw Patterns however I am not positive. I scanned a couple of the patterns in and stored them in my pattern directory. I have a a couple of other folks that are interested as well so I will delve into my scroll saw library and try to locate which book it came from. DW Quote
Phantom Scroller Posted June 16, 2015 Report Posted June 16, 2015 Good sellers there DW, great work as usual. Roly Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.