planeur Posted March 5, 2024 Report Posted March 5, 2024 Hello marquetries masters I want to put a name ( MEL or Mel ) on a marquetry allready glue on a MDF, it would be 3/4" long and 3/8" high, and I want the name Black color. Cutting the name on black marquetry ( quite difficult with that size... ), with a pencil with black ink... It could cut the name as intarsia... , some of that project are in intarsia. I will put oil for finishing . What would be your way to do it ? Thanks a lot À suivre..... planeur OCtoolguy 1 Quote
planeur Posted March 6, 2024 Author Report Posted March 6, 2024 Well .... after comparing the marquetry and the wood, I decided to cut the wood ! Had to cut two examples to have the good one! So here is the result, and on its final location....a hat! which is a part of my project... À suivre.... planeur OCtoolguy, Roberta Moreton, Dan and 2 others 4 1 Quote
Jim Finn Posted April 19, 2024 Report Posted April 19, 2024 (edited) I have done a lot of script lettering by doing "Double bevel inlay" using just my scroll saw. Edited February 2 by Jim Finn Scrappile, MarieC and OCtoolguy 2 1 Quote
OCtoolguy Posted July 27, 2024 Report Posted July 27, 2024 @JimFinn, your pics did not open. Can you try again. Quote
rjweb Posted July 27, 2024 Report Posted July 27, 2024 Ray, I guess it is too old and was deleted, RJ Quote
Scrappile Posted July 28, 2024 Report Posted July 28, 2024 There are a lot of YouTube videos on double-bevel marquetry. Many are worth watching. Jim Finn 1 Quote
Jim Finn Posted August 10, 2024 Report Posted August 10, 2024 On 7/27/2024 at 5:12 PM, OCtoolguy said: @JimFinn, your pics did not open. Can you try again. A few years ago I made 25 cedar boxes with different names on the lid. Jacob is one example of that group. OCtoolguy, Scrappile and barb.j.enders 2 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.