Popular Post Hawk Posted June 23, 2025 Popular Post Posted June 23, 2025 (edited) Well, another attempt at a resin pour with a scrollsaw pattern. This is a pattern from @alexfox which I took some liberties with. the "copper" color frame is ⅛ ply and the backer is ⅛ clear acrylic. Now the resin on the first pour I really missed the pitch with the color, i didn't add near enough dye for the color and it came out nearly clear, except for the orange. Turns out I didn't have any orange dye, I really should have checked to see if I had orange dye before starting the pouring process (lol). So I grabbed the orange mica powder I had for that. After everything cured I added another layer to every color except orange. The first yellow was too dark so eased up on the second. All in all a real learning experience and a reminder to be prepped properly next time. Edited June 23, 2025 by Hawk barb.j.enders, Wichman, Matt B and 15 others 18 Quote
heppnerguy Posted June 26, 2025 Posted June 26, 2025 quite the project. That one took a lot of work and it was sure worth it. Dick heppnerguy Hawk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.