Jump to content

Denny Knappen

SSV Silver Patron
 View Profile  See their activity

  • Posts

    6,011

  • Joined

  • Last visited

  • Days Won

    51

 Content Type 

Everything posted by Denny Knappen

  1. Denny Knappen
    Most of us can repair a scroll saw, so it would be a good deal if the parts were free.
  2. Denny Knappen
    Not sure if this is the final word, but I did get a response from Grobet. They said ,"We currently have 7 Refurbished 21" Pegas Saws available. These units are out of warranty but may be sent in for parts and repair. They have been refurbished at Grobet." I asked what they mean by "may be sent in for parts and repair". Their response is "The units will not be covered by any warranty but the parts may be purchased and the repair paid for." So it sounds like if the unit needs to be repaired, you pay for the parts, but the service is free. I am not sure if I would participate in this offer.
  3. Denny Knappen
    Look at Kevin's post above. I copied it and sent a copy to Grobet.
  4. Denny Knappen
    Yes, I didn't read "cheaper". That would make the saws around $740, but with no warrantee, not sure about the value. I also emailed Grobet with no response yet.
  5. Denny Knappen
    If I was to sell my demo Pegas Scroll Saw, it would be more than $200. More like $450.
  6. Denny Knappen
    This is the first I heard about refurbished Pegas Scroll Saws. I will check with Grobet, but my guess is something Bearwood may be doing.
  7. Denny Knappen
    Welcome to the Village form from TN. As mentioned, show pictures.
  8. Denny Knappen
    Thanks RJ
  9. Denny Knappen
    Thanks Don.
  10. Denny Knappen
    Thanks Dave.
  11. Denny Knappen
    Thanks Rodney. The wood was easy to cut.
  12. Denny Knappen
    Thanks Frank. The base is screwed onto the upright. I left some of the frets off the lower part so that I could screw onto the base.
  13. Denny Knappen
    Thanks Paul. I really like the patterns by Jacob Fowler.
  14. Denny Knappen
    I finished this project this morning. The pattern is by Jacob Fowler and found in the book “Woodworker’s Pattern Book”. I cut it on the Pegas Scroll Saw using several Pegas #1R MGT blades. The wood is1/2” unknown and 3/4” Red Oak for the base. The finish is spray Minwax Lacquer Clear Satin. Comments welcome.
  15. Denny Knappen
    Looks great to me, Kevin, but them I am a Ford man!
  16. Denny Knappen
    Wow, what a beautiful work of art, Dave. The fit looks perfect.
  17. Denny Knappen
    Great to see you back, Paul, and making the scroll saw hum. Post more when you can.
  18. Denny Knappen
    Very well done and nicely framed too!
  19. Denny Knappen
    Very well done.
  20. Denny Knappen
    Fantastic, Rodney. Your skill really shines on this cuttin.
  21. Denny Knappen
    I think I should respond here. That was the first and only Pegas Scroll Band Saw I sold. I told Dave I was reluctant as I had no experience with the Pegas Scroll Band Saw. As for the Pegas Scroll Saw, I can answer most questions and if not, Pegas support was there for me. Now, I agree with Dave about Pegas technical support being almost nonexistent on the Pegas Scroll Band Saw. I try to provide the best customer service possible, especially with Pegas Scroll Saw Blades. If anyone has problems with the blades, I would like to know rather than anyone getting upset.
  22. Denny Knappen
    Welcome to the Village Forum from TN.
  23. Denny Knappen
    I always finish after glue up.
  24. Denny Knappen
    I now list the Minimum Bit Size on the 3 dozen/pack Pegas blades.
  25. Denny Knappen
    Thanks Ralph. Cutting keeps me going.
×
×
  • Create New...