Popular Post munzieb Posted September 26, 2018 Popular Post Report Share Posted September 26, 2018 I've always had a thing for these old Grumman aircraft. The F3F was the last Bi-Plane fighter the Navy used for carrier service. I spent many hours cleaning up pixels to make this ready for cutting. Lots of thin lines (ref. Scoreing thread) and cutting was a little challenge. I cut a matching 1/4" backing and paint it black acrylic. I was going to contact spray the "back" of the cutting but the phone rang and I picked it up (scam Call!) I got back to my project and starting spraying and quickly realized I WAS SPRAYING THE FRONT!!!. I could have gotton away with it but for the TEXT.... I have a 5 gallon can of "OFF". Now I have a 4 gallon can of "OFF" Found a shallow baking pan and proceeded to use up a bunch of papertowels to clean it up. I did a whole lot of scraping in the cuttings to clean out the glue and sanding to get it back to where I should have been 2 hours earlier.... Finally got it done. Watch those distractions... meflick, 3Dface, bobscroll and 9 others 12 Quote Link to comment Share on other sites More sharing options...
rjR Posted September 26, 2018 Report Share Posted September 26, 2018 Even after the adventures it turned out great. Quote Link to comment Share on other sites More sharing options...
trackman Posted September 26, 2018 Report Share Posted September 26, 2018 As the saying goes "been there done that" LOL Quote Link to comment Share on other sites More sharing options...
JustLarry Posted September 26, 2018 Report Share Posted September 26, 2018 Outstanding. Sometimes we run into sticky situations. Larry Quote Link to comment Share on other sites More sharing options...
munzieb Posted September 26, 2018 Author Report Share Posted September 26, 2018 7 minutes ago, JustLarry said: Outstanding. Sometimes we run into sticky situations. Larry LOL! Quote Link to comment Share on other sites More sharing options...
bobscroll Posted September 26, 2018 Report Share Posted September 26, 2018 You did well to save it! It looks lovely and well finished, Thank you for posting, Bob Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted September 26, 2018 Report Share Posted September 26, 2018 Very nicely done. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 26, 2018 Report Share Posted September 26, 2018 Down Right Awesome job!!I can't tell ya how many times I have put glue on the front of the plaque. Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted September 27, 2018 Report Share Posted September 27, 2018 That's a very nice looking project and glad you saved it - thanks for sharing it Quote Link to comment Share on other sites More sharing options...
spirithorse Posted September 27, 2018 Report Share Posted September 27, 2018 Great looking project and I'm glad you were able to save it from the "oops". Thanks for sharing and God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 27, 2018 Report Share Posted September 27, 2018 Your patience is certainly worth it. It turned out great. Quote Link to comment Share on other sites More sharing options...
rdatelle Posted September 27, 2018 Report Share Posted September 27, 2018 I'm sure we've all been there one time or another. Came out great. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 27, 2018 Report Share Posted September 27, 2018 Your wifes' paintings on both sides of the fabulous planes caught my eye ! Good Job! Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 27, 2018 Report Share Posted September 27, 2018 Wow lucky. These scammers have a lot to answer for. You did a great job Bernd, well done. Marg Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 27, 2018 Report Share Posted September 27, 2018 great job, I hate those scam calls too Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 28, 2018 Report Share Posted September 28, 2018 What a terrific piece. I love those old planes. we have a small air field about 2 miles from our house and they have a fly-in there every winter. I missed the last one. I am really hoping that we will be home for the next one, as I am in hopes that someone will be selling rides in an open cockpit bi-plane. I would really love to cross that one off my bucket list. Your project is really cool. Is there any chance that you are going to post your pattern for this one? I bet a lot of people will be interested in cutting for their walls. It is a beauty Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted September 28, 2018 Report Share Posted September 28, 2018 That turned out awesome! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.