Psalm 104: 33 & 34

[Denny Knappen]

This is a Keith Fenton pattern, a project I wanted for Dianne.  I used 1/4" Baltic Birch plywood for the top layer and 3/8" Baltic Birch plywood stained black for the bottom layer.  The reason for 3/8" is so that the hanger would not poke through.  Cut on the Pegas scroll saw using Pegas #1SPR MG blades.  One coat of spray Shellac, sanded, a coat of spray Lacquer, sanded, and a final coat of spray Lacquer.  I used tiny screw eyes to attach the panels.  I did a video on attaching the panels on my YouTube channel, ArtCrafters Scroll Saw.  Comments welcome.

[rjweb]

Denny very nice, excellent cutting, RJ

[Mike Crosa]

Agree, very nice cutting and sentiment.

[Richard Hotchkiss]

Denny, very nice job on this piece. Keep up the good work.

[jerry walters]

I'll repeat what everyone else said, Very nice Denny.

Jerry

[daveww1]

awesome job

[don in brooklin on]

Outstanding cutting.

What size drill did you use around the high lighting for "Meditation"?  Had to look closely to see how it was done.

 

[Denny Knappen]

20 hours ago, rjweb said:

Denny very nice, excellent cutting, RJ

Thanks RJ.  It took a while to complete and assemble.

[Denny Knappen]

17 hours ago, Mike Crosa said:

Agree, very nice cutting and sentiment.

Thanks Mike.  Dianne actually wrote music to this verse.

[Denny Knappen]

17 hours ago, Richard Hotchkiss said:

Denny, very nice job on this piece. Keep up the good work.

Thaks Richard.  It was a fun project to complete.  Not my normal type of project.

[Denny Knappen]

11 hours ago, jerry walters said:

I'll repeat what everyone else said, Very nice Denny.

Jerry

Thanks Jerry.  Soon to be hanging in the house.

[Denny Knappen]

2 hours ago, daveww1 said:

awesome job

Thanks Dave.  Now that it is finished, on to other things.

[Denny Knappen]

6 minutes ago, don in brooklin on said:

Outstanding cutting.

What size drill did you use around the high lighting for "Meditation"?  Had to look closely to see how it was done.

 

Hi Don.  I used a #68 HSS Twist Drill Bit.  Just fit within the waste area.

[OLScroler]

Excellent cutting looks great 

Chris H

 

[Old Joe]

That took a lot of patience, the most valuable tool for a scroller. Nice job!

[Denny Knappen]

On 6/17/2026 at 9:19 PM, OLScroler said:

Excellent cutting looks great 

Chris H

 

Chris, thanks for the nice comment.

[Denny Knappen]

1 hour ago, Old Joe said:

That took a lot of patience, the most valuable tool for a scroller. Nice job!

Thanks Joe.