Wichman Posted August 17 Posted August 17 The dragon pattern is in the Village pattern library Fab4, Aggie and JackJones 3 Quote
Denny Knappen Posted August 18 Posted August 18 Do you have enough outlets for all your covers? Quote
Wichman Posted August 18 Author Posted August 18 1 hour ago, Denny Knappen said: Do you have enough outlets for all your covers? Yep This needs a custom size, the window trim on the outlet side is too close for a standard cover; as long as I'm at it, why not fancy it up a bit? Fab4 and OCtoolguy 2 Quote
Wichman Posted Saturday at 07:40 PM Author Posted Saturday at 07:40 PM five hours of cutting Roberta Moreton, JackJones and OCtoolguy 1 2 Quote
Wichman Posted Sunday at 06:57 PM Author Posted Sunday at 06:57 PM The next step will have very delicate areas. I will have to cut a little on one fret and then switch to the adjacent fret to maintain the most stability of the surrounding area Quote
Wichman Posted Sunday at 07:00 PM Author Posted Sunday at 07:00 PM The area of the eye is very delicate and I've already used superglue on the backside to reinforce the wood. JackJones 1 Quote
Joe W. Posted Sunday at 07:49 PM Posted Sunday at 07:49 PM 45 minutes ago, Wichman said: The area of the eye is very delicate and I've already used superglue on the backside to reinforce the wood. What a great idea! Thanks for sharing that. I just finished cutting out some really small letters for a compass rose and was worried about them breaking up. They came out OK, but next time I'll use the superglue for a little added extra piece of mind. Wichman 1 Quote
Wichman Posted Monday at 07:04 AM Author Posted Monday at 07:04 AM Seven and a half hours and the cutting done. Tomorrow I'll clean the residue off and use a grey wash on the wood, let dry and use glitter paint to highlight the details. I'll use a sliver mirror paper for a backer and I should be done. JackJones and Joe W. 2 Quote
Wichman Posted Monday at 08:55 PM Author Posted Monday at 08:55 PM Grey wash, and metallic cobalt blue eye done; with several coats of rattle can shellac. Once the shellac has had plenty of time to dry I'll glue the backer on. JackJones 1 Quote
Wichman Posted Tuesday at 12:49 AM Author Posted Tuesday at 12:49 AM All finished. Will install tomorrow. Quote
Wichman Posted Tuesday at 01:09 AM Author Posted Tuesday at 01:09 AM (edited) a short video 20260831_174517.mp4 Edited Tuesday at 01:23 AM by Wichman JackJones 1 Quote
barb.j.enders Posted Tuesday at 11:42 AM Posted Tuesday at 11:42 AM On 8/30/2026 at 2:00 PM, Wichman said: I've already used superglue on the backside to reinforce the wood. Does this mean that you apply superglue as a coating? Quote
Wichman Posted Tuesday at 12:22 PM Author Posted Tuesday at 12:22 PM 25 minutes ago, barb.j.enders said: Does this mean that you apply superglue as a coating? No, when I realized the pupil would be very weak, I turned the piece over and applied a drop to the pupil, after cutting it. When I looked at the rest of the eye I applied the superglue, just on that area, before I cut it. I had to use fingernail polish remover to the paper around the pupil in order to get the pattern off the pupil without breaking it. I added the backer, in part, to strengthen these delicate areas. barb.j.enders 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.