Jump to content

Mark SW

Member
 View Profile  See their activity

  • Posts

    261

  • Joined

  • Last visited

 Content Type 

Everything posted by Mark SW

  1. Mark SW
    This is an old Lasko and the refrigerator on the left side is over 50years old and still works.
  2. Mark SW
    Kevin check out McMaster-Carr different metal filters air filters | McMaster-Carr McMaster-Carr maybe? Reusable Metal Panel Filters, 1/2" Thick, 13 x 16-1/2 Trade Size | McMaster-Carr this one is $9.25 Hope this helps. Mark
  3. Mark SW
    John Just wondering which blades you used? Thanks Mark
  4. Mark SW
    Like the idea for the bases. Nice job. I have a bunch of 2 to 4 inch Maple branches I was trying to figure out what to do with. Bases
  5. Mark SW
    Shadow Wizard just keep on asking there is a vast amount of knowledge here. Scrollsaw Workshop by Steve Good is another great resource. Scrollsaw Workshop
  6. Mark SW
    Kevin, Thank you for trying the PS blades. Always look forward to test reports and advice from the forum.
  7. Mark SW
    Shadow Wizard Take a look at this web site. Sheila is also in Canada and has information about different types of woods and blades among other helpful topics. I believe she still uses Olson blades. Free Pattern & Resources - Sheila Landry Designs Other blade manufacture to consider Flying Dutchman | Mike's Workshop – Mike's Workshop | Flying Dutchman Scroll Saw Blades (mikesworkshop.com) Pegas Scroll Saw (artcraftersonline.com) which is the website of a member here Denny Knappen . Hope this helps. Mark
  8. Mark SW
    Glad you got them a little early. Looking forward to your test.
  9. Mark SW
    Darn, Hopefully you get your parts and phone call soon. Please keep us posted.
  10. Mark SW
    Mike ,I don't if this helps but here are multiple manuals. Scroll-Saw-Manuals (hawkwoodworkingtools.com)
  11. Mark SW
    I sent them a message yesterday to see where they were made. I guess I misworded it. PS Wood Machines <[email protected]> Tue 10/19/2021 3:50 PM They are a precision ground blade. --- Thank you, Beth PS Wood Machines 3032 Industrial Blvd Bethel Park, PA 15102 1-800-939-4414 > > Are your PS scrollsaw blades stamped/milled with Swiss steel in the > US? Be nice to see your thoughts
  12. Mark SW
    Nope just Olson
  13. Mark SW
    Jim, I always thought Menards was a southern location. When I looked at the map they are located all the way to Wyoming and Kansas. I made the Garden City KS store my choice. They even have scrollsaw blades. Thank you
  14. Mark SW
    Since I ordered my new Hawk (BM20) September 30th I am following this topic. I am hoping to receive it in a week or two. Kevin has a endless wealth of knowledge as does everyone here. On a side note if you have not you need to take time and read his blog about how he got started. Very inspirational. My Scroll Sawing Story (kevskrafts.com)
  15. Mark SW
    In image #4 the tube looks like it might be a dust blower. When I searched "ACCU CLEAR PUMP" it has a link to Ryobi scrollsaw parts Ryobi Scroll Saw Parts | Fast Shipping | eReplacementParts.com & Ryobi SC160 SCROLL SAW Parts | Tool Parts Direct Good luck Mark
  16. Mark SW
    "Informative Scroll Saw Articles" by Sheila Landry Designs has been helpful to me as well. Free Pattern & Resources - Sheila Landry Designs Mark
  17. Mark SW
    Fantastic work!!! What an honor to have your work on Sue Mey's site. Do you recall the pattern name?
  18. Mark SW
    Maybe everyone could list there suppliers so we can have an updated list. Blades, wood, saw parts,... Flying Dutchman | Mike's Workshop – Mike's Workshop | Flying Dutchman Scroll Saw Blades (mikesworkshop.com) Just recently http://www.hawkwoodworkingtools.com/ Because I can't pronounce it Ocooch Hardwoods - Thin Wood for Scroll Sawing, Laser Engraving/Cutting, Woodturning, Intarsia and More and of course https://www.artcraftersonline.com/ Yes, No, Maybe Mark
  19. Mark SW
    Kevin, Thank you SO much for the information. It is a shame it is still an active site. I will remove it from my favorites list.
  20. Mark SW
    You can find a donkey head pattern here. It has two donkeys. https://oldcrowscrollwerks.weebly.com/ Good luck Mark
  21. Mark SW
    Kevin, You are correct the shipping is $200.00
  22. Mark SW
    Thank everyone for the response. Ray your post is very insightful as I too am old, half a century two lustrums( Rooster Cogburn fan) and four years. On things where I can afford them I prefer new. With that I went and ordered the BM-20 and a few parts that see wear and tear such as the wedge pivot and nylon washer. I added the Performance package which includes Accessory Table, Mag Light, Foot Switch, and (2) Lower blade holders. The customer service was excellent. I sent an email Wednesday morning and had a response within a couple hours. Did the same thing in the afternoon had a response Thursday am. Called Thursday afternoon got right thru to Hope a very knowledgeable lady. She had no trouble with my questions or finding part numbers. Half and hour latter my Hawk is ordered. Delivery should be 4 weeks according to BN. I know that the way things are now (completely 7 letters) that it takes time. Overall I am pleased with my Bushton Manufacturing experience. Thank you Mark
  23. Mark SW
    Kevin and Ray I appreciate the honest input. I will keep you posted Thank you Mark
  24. Mark SW
    I am seriously looking at the BM20 and have been in contact with Bushton thru email since Wednesday September 29 2021. I had a couple of questions I needed answered and had a quick reply. There seems to be ALOT of negative comments here. So should I wait or proceed ? Thank you BUY AMERICAN Mark
  25. Mark SW
    Everyone here does!! They all seem inexpensive I will have to get a couple of each to find out which works best for me.
×
×
  • Create New...