Jump to content

Denny Knappen

SSV Silver Patron
 View Profile  See their activity

  • Posts

    6,011

  • Joined

  • Last visited

  • Days Won

    51

 Content Type 

Everything posted by Denny Knappen

  1. Denny Knappen
    Thanks Dick. I like how it turned out, but there were 150 holes. Some holes real small.
  2. Denny Knappen
    A project finished Monday. This is a Steve Good pattern. I used 1/4" solid Walnut and backed with 3/8" Baltic Birch plywood. I used 3/8" so that it would hold the hanger without going through the wood. Cut on the Pegas Scroll Saw using #1R MGT blades on all interior cuts and #3R on the exterior cuts. The finish is one coat spray Shellac as a sanding sealer. Then two coats MinWax Lacquer Clear Satin, sanding in between coats. I should have used 1/8" so that the white would show through the Walnut. 150 holes. Comments welcome.
  3. Denny Knappen
    Welcome to the Village forum from Tennessee.
  4. Denny Knappen
    Thanks Paul.
  5. Denny Knappen
    Wow, thanks all for the nice comments.
  6. Denny Knappen
    Thanks Frank. I like it, but not a difficult project.
  7. Denny Knappen
    Thanks Dan. How is the new saw?
  8. Denny Knappen
    Thanks for the nice comment.
  9. Denny Knappen
    Topic got moved. I didn't think it was anything to brag about!
  10. Denny Knappen
    Thanks Pete. Only making one. We will see what happens.
  11. Denny Knappen
    "Welcome" sign finished. The pattern is by Keith Fenton and found in CWWC March 2014. Cut on the Pegas Scroll Saw using Pegas #1 and #5 Skip blades. The wood is 1/2" Poplar 8" x 14" and backed with Baltic Birch plywood stained blue. Comments welcome.
  12. Denny Knappen
    Welcome to the Village forum from Dayton, TN
  13. Denny Knappen
    Welcome to the Village forum from Tennessee.
  14. Denny Knappen
    Welcome to the Village forum from TN
  15. Denny Knappen
    Thanks Joe. I have a friend that uses #3 but slow going. I have always used #7.
  16. Denny Knappen
    Thanks Mark. Pens blanks would work. The stock for the little birds is 3/4” x 3/4” x 1 1/2”.
  17. Denny Knappen
    Thanks Paul. I end up giving some to family and friends.
  18. Denny Knappen
    Thanks Les. Fun to make too!
  19. Denny Knappen
    Thanks Ralph. Last I heard, the saws cleared customs and should be in the Pegas warehouse next week.
  20. Denny Knappen
    Thanks Frank. They are fun to cut.
  21. Denny Knappen
    Four Miniature Birdhouse Ornaments finished and ready to display. The birdhouses are Ash and the little birds are Purple Heart. I used Pegas #7 Skip blades on the birdhouses and #5 Skip blades on the little birds. The finish is dipping in Shellac further diluted with 50% denatured alcohol. Comments welcome.
  22. Denny Knappen
    Well done, Les. No naked photos (unfinished) is good.
  23. Denny Knappen
    Nice clean lines. Great cutting.
  24. Denny Knappen
    Well done. Compound cutting is fun.
  25. Denny Knappen
    Great presentation including the butterflies
×
×
  • Create New...