Popular Post nrscroller Posted July 27 Popular Post Posted July 27 This is a Steve Good layered pattern I made from bb plywood today, my first ever layered project. It is a gift for a band player I know well. I used 1/4 inch and then sprayed with varnish Bill . heppnerguy, Horseshoe, flarud and 18 others 21 Quote
nrscroller Posted August 1 Author Posted August 1 i glued them together and clamped for a while and then I ran the edges around on my 1x42 strip sander so the lined up all around and then I sanded the edges with a nail file litley Quote
dgman Posted August 1 Posted August 1 Nice job on that! What i do with those is cut out the inside cuts first. Then, i glue the overlay onto the backer board. Then when dry, i cut out the outer line. That way the overlay and backer will always be even without having to sand! wombatie 1 Quote
barb.j.enders Posted August 2 Posted August 2 14 hours ago, dgman said: Nice job on that! What i do with those is cut out the inside cuts first. Then, i glue the overlay onto the backer board. Then when dry, i cut out the outer line. That way the overlay and backer will always be even without having to sand! That is what I do too! dgman 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.