Jump to content

Dan

SSV Silver Patron
 View Profile  See their activity

  • Posts

    7,234

  • Joined

  • Last visited

  • Days Won

    88

 Content Type 

Everything posted by Dan

  1. Dan
    I used a Dremel and various bits. I considered trying some carving tools but don't have the patience right now. It's a little hard to tell from the photo but the sanding isn't the best. Again, patience.
  2. Dan
    I made some pen boxes with labels. I used waterslides (decals). My process was to finish the wood as normal. I used water-based poly. After the last coat I sanded with 220 grit, removed the dust, and applied the waterslide being sure to remove all the water and air beneath the label. I let the pieces sit overnight then applied two coats of the same poly in the spray can. Seemed to work well for me. I had tried using clear labels but didn't like the thickness of the label.
  3. Dan
    That's what I thought when I first cut acrylic sheets. Not the case. Probably not enough adhesive on the paper covering. Slowing the balde helped some but not enough to keep things from gluing back together. I put clear packing tape over the cut lines and had no melting. I can't remember what blades I used but it was before I started using Pegus blades.
  4. Dan
    Well, it's probably been two years since I posted anything I made. This is a pattern from Scroll Saw Woodworking and Crafts, Fall 2008. Since day the day I received the magazine I said I was going to try this pattern. Let's see, that's 2023 minus 2008, subtract, carry the 1, about 15 years ago. Dick Miraglia was featured in that issue and did a fine job explaining the steps. I was a little hesitant about some of the steps but decided I could always use the firewood if it doesn't work out. Grabbed a maple slab, cut to size, used a trim router to lower the perimeter, then the fun started. The scrolling was straightforward but the maple made is slower than I'm use to. The trickiest part was carving/shaping the face. Not too bad, but I'd tackle it a bit different next time. The detailing was fast and fun. A big shout to @dickmira for the great article. I'll be doing some others as soon as I create some patterns. Cheer everyone!
  5. Dan

    Hi to all

    Dan replied to Hylogenesis's topic in Introductions

    Welcome to The Village from Ohio!
  6. Dan
    I've put clear packing tape over acrylic and it almost eliminated the melting. Extra support, whether stacking acrylic or using thin plywood, I'd also suggest.
  7. Dan
    Welcome to The Village from Ohio.
  8. Dan
    Welcome back!
  9. Dan
    Mostly 1/8".
  10. Dan
    Welcome from Ohio! I bet you have a lot of stories to tell. Can't wait to see some of your work.
  11. Dan
    I am sold on dewaxed shellac. I used it on MDF, sanded, and one coat of spray paint looked great, even on the ends. By the time you finish the second project the first is ready to sand.
  12. Dan
    Well, guys, all your setups really suck! I think I'll do exactly the same. Thanks for all the great ideas.
  13. Dan
    Welcome from Ohio!
  14. Dan
    Welcome from Ohio!
  15. Dan

    New here

    Dan replied to bourbon25's topic in Introductions

    Welcome to the Village, Dave. I'm not sure what saws are available in UK so I'll leave that to the folks across the pond.
  16. Dan
    I agree with @Mark SW but the color wins again.
  17. Dan

    Lucet

    Dan replied to Wichman's topic in Bragging Rights

    Thanks. I learned something today.
  18. Dan

    Lucet

    Dan replied to Wichman's topic in Bragging Rights

    OK, I'll ask... What's a lucet and what's it used for?
  19. Dan
    I forgot another trick...shelf liner. I've used it several times. The peel-and-stick liner is placed right to the wood. Then glue the pattern to the shelf liner. The adhesive in the shelf liner helps lubricate the blade. And, no clear packing tape over the pattern.
  20. Dan
    Hey, Jim. If you're concerned with burning the wood as you cut, many, including myself, will use clear packing take over the pattern. The adhesive will provide lubrication of the blade and reduce heat buildup on the blade. Also, your blade selection will help. I tried using wax years ago and found it doesn't work for me. Others will chime in shortly.
  21. Dan
    Welcome to the Villiage, Jack. So far, it sounds like your saw is newer than 1998. Hope to see some of your work soon.
  22. Dan
    Welcome from Ohio!
  23. Dan

    Hello all

    Dan replied to bryon c's topic in Introductions

    Welcome from Ohio!
  24. Dan
    He helped me several times. He will be missed. R. I. P.
  25. Dan
    Rick, is this what you're looking for. https://www.digikey.com/en/products/detail/assmann-wsw-components/AK670-OE-BLACK/2391700?utm_adgroup=General&utm_source=google&utm_medium=cpc&utm_campaign=PMax Shopping_Product_Zombie SKUs&utm_term=&utm_content=General&gclid=Cj0KCQjw0IGnBhDUARIsAMwFDLkXfGX63IjhcroIJL_aiXFlzfeP7xwaQmo35sRMOm05PpGiYWV_hTMaArptEALw_wcB Not sure how much is too much to spend.
×
×
  • Create New...