Jump to content

ike

SSV Patron
 View Profile  See their activity

  • Posts

    4,275

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by ike

  1. ike
    Went to a garage sale yesterday and bought a Dremel variable speed , dremel attachments and a dremel router table ( attaches to yuour work bench. for a total of $5.00 even if the router table isn't any good it's still a good deal. IKE My computer is playing games with me .
  2. ike
    I paid $150 for a type 1 DW 788 and it is my back up saw. when my saw was down for 3 weeks I made sure I hd a back up ike
  3. ike
    Here is my idea for the Deer wine bottle holder. add electric to it. see next posting.
  4. ike
    you can make a sharp turn with any flat blade FE or olson's. IKE
  5. ike
    That is the best use for those inserts Nice going. IKE
  6. ike
    I use a #7 for miniature bird houses It does a fine job. IKE
  7. ike
    looks great. ike
  8. ike
    when I cut a puzzle i use an Olson's # 3 r and they fit good. be sure not to put any pressure on the sides. and a medium speed with a slow feed. IKE
  9. ike
    T get into a sale like that This would become a job rather than a hobby. Just my opinion .IKE
  10. ike
    I stack 3 or 4 1/4 pieces or plywood and use no lube . I make 15X12 Christmas trees with a nativity scene in the middle and using Olson's blades I usually use 1 or 2 blades I set my speed on a dw 788 saw at # 5 speed. in fact I very seldom exceed that speed each tree has 35 holde in them. To me speed is the digest cause of blade failure.IKE
  11. ike
    That is one mean looking ghost IKE
  12. ike
    I use a 10 in. drill press but at times it won't reach some holes then I use a dremel plunge router. IKE
  13. ike
    I have done some cutting of vinyl I put painters tape on the record then the pattern I run at a 4 or 5 on my dw788 the tape helps with the melting back together using a #3 blade.. I just haven't found any thing I wanted to cut yet.
  14. ike
    That is a great cutting IKE
  15. ike
    Nice display of yur top quality work. IKE
  16. ike
    very nice . I like both. *IKE
  17. ike
    What ever the store I am in All brands seem to be the same to me. IKE
  18. ike
    I posted a while back that I was going to try Elmer's preposition spray glue if you are going to cut it today or you don't get finished it isn't too great. The second day the pattern came up as I was cutting. Elmer's stick glue saved the day. I now have Krylon . spray glue I know it will hold.IKE
  19. ike
    i HAD MY SAW BOLTED DOWN BEFORE i CU MY FIRS PIECE. i LEARNED A LONG TIME AGO THAT IF YOU A ARGUE WITH A POWER TOOL YOU ARE GOING TO LOST, i LOST 1/2 OF MY SUM WITH A TABLE SAW. . ike
  20. ike
    That's impressive. IKE
  21. ike
    I like it . The log and eye's make it. Good work. IKE
  22. ike

    painters tape

    ike replied to nancy's topic in Introductions

    I spray to the pattern and remove with paint thinner, then clean the wood with the thine rand let dry, if there is any residue left I use the thinner on it again. No problem with sanding. IKE
  23. ike
    GLUE IT WITH TIGHTBOND ike
  24. ike
    I use 600 grit emery paper on lacquer, works fine., I bought it at a garage sale a couple years ago about 400 sheets of 600 & 400grit paper. IKE
  25. ike
    I use Olson's I seem to get a smother cut and they last longer. I do most of my cutting at a 5 on my SW 788. IKE
×
×
  • Create New...