Jump to content

danny

Member
 View Profile  See their activity

  • Posts

    1,141

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by danny

  1. danny
    Greetings to All. Been a while for me to be on. Sorry.... I have a Wonderful SIL that has asked me to cut a pattern of her Cats. Here is her pic. Is it good enough for a Good Pattern to be made from it? Or not? If you think it is could you Please tell me who to contact for a pattern? BIG THANKS IN ADVINCE........................Danny :+}
  2. danny
    All mentioned above I have tried. I buy self adhesive back from Amazon. First I put a layer of LAVENDAR low tac tape on. Then the Pattern printed on a Inkjet Printer. Works GREAT.... Danny :+}
  3. danny
    And a BIG THANK YOU.... I shall do some checking around. Danny :+}
  4. danny
    Hello.... Was told last time I asked that the Main Circuit Board needed replacing. Never did buy. Back then Hegner rep quoted me almost $300. The saw is 27 years old and I have had it since 1995 and its been a Great type of Work Horse. Lots of Pieces have been cut. Now is there any other supplier I could contact? The cost at Hegner is to steep for me. Thanks for any info................The saw still will run, but awfully on the slow side. Thanks.... Danny
  5. danny
    Well after a Decade Plus I really want a New Light System for Scrolling. Been looking and I just decided to ask the Family. Love that.... So any tips on a really good set up? Danny :+}
  6. danny
    I just gotta chime in on this subject. Maybe I have always been thinking I was the only one that started many projects and for some reason decided to just not finish. Like around a Dozen. Some days I do\ inspect and try to understand WHY its it this Drawer or Shelf and ALL are is great condition and just need some Finishing etc. Anyway Yea DTR I will have things to do. Hehe Danny :+}
  7. danny
    Compressed Air used with No Positive Results. boohoo Danny
  8. danny
    THANKS AGAIN ALL. I think I will just start saving and buy a New Speed Control Lil Circuit board. Later.........Danny :+}
  9. danny
    YES....YES.... WHAT I AM EXPERIENCING IS THE SAME AS YOU JUST SAID. Another thing I have did is IF IT STARTS REAL SLOW OR JUST NOT AT ALL .... I TAP THE SPEED KNOB AND IT STARTS GOING. I have called Advanced Machinery as they seem to be Hegner company etc. They told me FOR SURE THAT IT WAS THAT LITTLE CIRCUIT BOARD. Speed Control.... :+}
  10. danny
    BIG BIG THANKS TO EVERYONE. THE SAW WILL START AND RUN. I DID HIT N MISS AND FOUND A SWEET SPOT SO TO SPEAK WITH THE SAW NOT RUNNING FULL SPEED. I CAN USE IT COMFORTABLY. ITS JUST SLOWER THAN I AM USE TO. Thanks Again.........Danny :+} I will try to contact spray and the Air.
  11. danny
    AMAZON HAS MANY SUPPLIERS. I HAVE BOUGHT THERE MANY TIMES. ALL GOOD. Danny :+}
  12. danny
    NOTHING ON YOUTUBE. BOOHOO......................
  13. danny
    Are you talking about the Motor itself? What you say does sound Logical. No NOT BEING ELECTRICAL WISE i would think i need some lessons.... Maybe YouTube can help. I go check. Thanks for your Advice. Danny :+}
  14. danny
    IS THERE A WAY TO FIX THE CIRCUIT BOARD THAT CONTROLS THE SPEED? IT HAS BEEN SLOWLY GETTING WORSE. CALLED ADVANCE AND CIRCUIT BOARD IS LIL OVER $200.00 WHICH I CANNOT AFFORD AT THIS TIME. ANYWAY JUST PUTTING THIS OUT AND HOPING. THANKS IN ADVANCE FOR ANY ADVICE. Danny :+}
  15. danny
    And thats One Way. Like I used to Spray glue like that and strait on the wood, After Cutting I would Spray Mineral Spirits wait for minutes and lift the pattern off in One Piece. Well that was well and Good, but The Smell of the Spirits and the Afterwards Clean up proved more that its worth. So Back to the Tape on the wood blank and I use Self Adhesive Paper to print my patterns on. This has been my go way for Years. Never Changing. Danny :+}
  16. danny
    Forever and Ever I have used just a dab of Glue mostly in All Patterns. In the Corner. Clamp and wait to dry. Works perfectly.... Danny :+}
  17. danny
    I do not really like how Good Kyle Larson is and is up front almost every race, but I gotta admit that He Is a Good Nascar Driver. Almost as Good as Jimmy and Jeff. Some of the New Drivers are showing they know how to drive and win. Oh well. :+}
  18. danny

    2 dragons

    danny replied to TAIrving's topic in Bragging Rights

    WOW WE.... Dragons are in My Liking to cut. Love the way Individual pieces fit and create the Dragon. Yes I am waiting for your reply to Where.... Danny :+}
  19. danny
    I Used to have your issues. Not now. I found using DANISH OIL (various colors) works perfectly. Just another way. But really just a Good Sanding and then two or three coats of Poly will make the piece look Great. Danny :+}
  20. danny
    Yepper....Had same Size Issues long ago when I cut a couple for my Wife and Friend. Learned that the Type of Brand they use was a different size than the box was designed for. So like you said.... Measure that type of project first. Love this Village.... Danny :+}
  21. danny
    Great Scrolling and to look at his face I can feel he is kind of real. Wonderful Pattern. Wanna Share? Danny :+}
  22. danny
    Your looks Great. I did cut this pattern soon after starting with this Wonderful Hobby. I feel with it being displayed on a wall it will be Truely Admired. Well Done. Danny :+}
  23. danny
    Very, Very Beautiful Scrolling. How can you cut such Tiny Words so perfectly? Danny :+}
  24. danny
    Now I REALLY LIKE THIS. Is Eye Catching and I just Love the Colors with the wood look. And as your usual very, very well cut and Displayed. Danny :+}
  25. danny
    Gee you give me Ideas for my Craft Show. Especially the lil Nativity scene. By any chance would you mention where I can get this pattern? All your JigSaw pieces look Outstanding. Some I have cut back yonder. Good Luck with the Sales. Danny :+}
×
×
  • Create New...