RabidAlien Posted March 23, 2019 Report Share Posted March 23, 2019 22 minutes ago, Gonzo said: That's funny! Thanks for an early morning laugh Sarcasm and BadDadJokes....two services I offer to the world, free of charge. My wife's up for sainthood for putting up with me this long. John B and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post scrollntole Posted March 23, 2019 Popular Post Report Share Posted March 23, 2019 Here are five bowls I've made this past winter that I hope customers at craft fairs will like. These designs usually attract good attention from folks at these fairs... Vin Gonzo, romka555, Tomanydogs and 9 others 12 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 23, 2019 Report Share Posted March 23, 2019 6 hours ago, John B said: Very nice Ray, they would make super Easter Presents filled with chocolates, actually great any time presents filled with choccies, nuts etc. Right on John. My wife just informed me that I need to make about 6 more for gifts. I guess I'll never get to move on to other projects. John B 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted March 24, 2019 Report Share Posted March 24, 2019 14 hours ago, scrollntole said: Here are five bowls I've made this past winter that I hope customers at craft fairs will like. These designs usually attract good attention from folks at these fairs... Vin I love the second one down, where'd you get the pattern? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
scrollntole Posted March 24, 2019 Report Share Posted March 24, 2019 Hi Kirk ... about the second one down, that design came from a book called "Scroll Saw Basket Weave Projects" published by Fox Chapel Publishing, authors are John Nelson and William Guimond. It has twelve designs but please note that one of the designs is all wrong. Simply, the picture does Not match the detailed plans at all. I will say that Fox Chapel appreciated it when I pointed this out to them, to the point that I Will buy from them again. So, just be aware.... have a good one. Vin OCtoolguy and RabidAlien 2 Quote Link to comment Share on other sites More sharing options...
meflick Posted March 25, 2019 Report Share Posted March 25, 2019 (edited) Ok, this will be a duplicate post as I am adding this box to my "what I have been up to lately post" with some other things but this is the box I made on my scroll saw last week. The directions and the patterns for it came from the staff of Woodworker's Journal - Keepsake Box from Aug. 20, 2014 and was found here: http://www.woodworkersjournal.com/keepsake-box-project/ I used poplar because I had plenty of that on hand and THEN read that it is not a good wood for staining. (It's grain pattern tends to absorb unevenly.) I had it because that is what I use when I am cutting out Iggy/Harvey's animal puzzles and I don't stain those. I did apply a pre-stain wood conditioner. Then applied American Chestnut wood stain about 3 or 4 coats. Then added a shellac finish. It turned out ok I think but next time will not use poplar when I want to stain. I am still trying to decide on what I want to put as far as a handle (if at all) and whether I want to flock the inside of the box, and if so, what color. Edited March 25, 2019 by meflick Jronn65, John B, Scrappile and 6 others 8 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted March 25, 2019 Report Share Posted March 25, 2019 13 minutes ago, meflick said: flock the inside of the box, and if so, what color. Oooh, a gorgeous midnight blue would just finish off a beautiful piece. meflick and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
alexfox Posted March 27, 2019 Report Share Posted March 27, 2019 Here is my collection of bowls, I like to make bowl patterns and have many ideas for my next patterns All patterns available here Tomanydogs, Travis, OCtoolguy and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Scrappile Posted March 27, 2019 Popular Post Report Share Posted March 27, 2019 Oh, I might as well... made the Five Dragon box to put old nuts and bolts in, the Dutch box is where I throw my used and broken scroll saw blades. Then I made two Hamsa boxes to put ear wax in which is what I use make it easier to get screws screwed in. Rob, spotsdad, meflick and 10 others 12 1 Quote Link to comment Share on other sites More sharing options...
Popular Post heppnerguy Posted March 27, 2019 Popular Post Report Share Posted March 27, 2019 I have a couple of boxes I thought I might enter, for the fun of it. One is an inlay of Elvis that I made for my wife and the other is one that I made for her that she liked when I showed it to her and she wanted me to cut for her. Dick heppnerguy romka555, meflick, Jronn65 and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted March 27, 2019 Report Share Posted March 27, 2019 1 hour ago, Scrappile said: Oh, I might as well... made the Five Dragon box to put old nuts and bolts in, the Dutch box is where I throw my used and broken scroll saw blades. Then I made two Hamsa boxes to put ear wax in which is what I use make it easier to get screws screwed in. Wow, amazing .... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted March 27, 2019 Report Share Posted March 27, 2019 32 minutes ago, heppnerguy said: I have a couple of boxes I thought I might enter, for the fun of it. One is an inlay of Elvis that I made for my wife and the other is one that I made for her that she liked when I showed it to her and she wanted me to cut for her. Fabulous boxes, my other half would love the Elvis one. OCtoolguy and John B 2 Quote Link to comment Share on other sites More sharing options...
Popular Post tgiro Posted March 27, 2019 Popular Post Report Share Posted March 27, 2019 Just love playing with rainbows - - - RabidAlien, spotsdad, Foxfold and 10 others 12 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 28, 2019 Report Share Posted March 28, 2019 On 3/27/2019 at 2:09 PM, tgiro said: Just love playing with rainbows - - - wow. that is so outstanding. I am blown away by your skills. would it be possible to see a side photo of this piece? I am totally unaware of how you could go this. How do you go about coloring the wood? What sort of angle are you using to cut this? How thick is this wood and what type of wood are you using? This is so beautifully done. You are truly an artist in every respect. Thank you so much for posting this. Dick heppnerguy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
tgiro Posted March 29, 2019 Report Share Posted March 29, 2019 14 hours ago, heppnerguy said: wow. that is so outstanding. I am blown away by your skills. would it be possible to see a side photo of this piece? I am totally unaware of how you could go this. How do you go about coloring the wood? What sort of angle are you using to cut this? How thick is this wood and what type of wood are you using? This is so beautifully done. You are truly an artist in every respect. Thank you so much for posting this. Dick heppnerguy OK - First - I didn't color the wood. The wood is from some left over strips of SpectraPly blocks, that I had used on another project. SpectraPly comes from Cousineau Wood Products -- https://www.cwp-usa.com/collections/spectraply-blanks The process is called Bowl-from-a-Board. I made the board from the SpectraPly strips, then used my scroll saw to cut the rings out of it. The rings were about 5/8" thick and I cut at a 45 degree angle. When I was done shaping the bowl, the wall of the bowl was about 3/8" at the base - tapering out to 1/8" at the lip. The base and lip are made of maple. The lip ring was made using segmented ring methods. If you are patient, and have the right sanders, you can shape the bowl with just the sanders. I cheated and used my lathe to spin the bowl while I worked. See Carole Rothman's youtubes and articles on how to cut bowls with a scroll saw and shape them with sanders. Here is the only side picture I have. The bowl sold so I can't take any more. RabidAlien, Karl S, OCtoolguy and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 29, 2019 Report Share Posted March 29, 2019 3 hours ago, tgiro said: OK - First - I didn't color the wood. The wood is from some left over strips of SpectraPly blocks, that I had used on another project. SpectraPly comes from Cousineau Wood Products -- https://www.cwp-usa.com/collections/spectraply-blanks The process is called Bowl-from-a-Board. I made the board from the SpectraPly strips, then used my scroll saw to cut the rings out of it. The rings were about 5/8" thick and I cut at a 45 degree angle. When I was done shaping the bowl, the wall of the bowl was about 3/8" at the base - tapering out to 1/8" at the lip. The base and lip are made of maple. The lip ring was made using segmented ring methods. If you are patient, and have the right sanders, you can shape the bowl with just the sanders. I cheated and used my lathe to spin the bowl while I worked. See Carole Rothman's youtubes and articles on how to cut bowls with a scroll saw and shape them with sanders. Here is the only side picture I have. The bowl sold so I can't take any more. Thank you for all the good info. I have never even heard of this wood before now. Easy to see why it sold. You did a fabulous job on it. I still view it with a lot of 'awe'. I will check out the site you posted for this wood. You sure had me shaking my head with disbelief when I saw this one Dick heppnerguy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted March 30, 2019 Report Share Posted March 30, 2019 18 hours ago, heppnerguy said: Thank you for all the good info. I have never even heard of this wood before now. Easy to see why it sold. You did a fabulous job on it. I still view it with a lot of 'awe'. I will check out the site you posted for this wood. You sure had me shaking my head with disbelief when I saw this one Dick heppnerguy Dick, do you subscribe to the Scroll Saw Woodworking & Crafts magazine? If you do, look at the Fall 2018 edition, Issue 72. They did an article on the SpectraPly on page 66. They used it to do several different types of scroll work. They had JGR use some and she created a chameleon with it. Bruce Shea did a beautiful bowl with stars, then they had a puzzle, a bracket, and an ornament. Our Woodcraft store sells small blanks for pen turners of the material. It is not cheap stuff and it takes a while to receive your order from Cousineau because it is "custom-made". The magazine says it starts at $52 for a 3/4" by 9 1/2" by 40" piece. I wanted to give some of it a try so i ordered some thinking hubby might also want some for turning. It seemed to take forever to get it but it finally arrived. I have not yet done anything with it. Given its expense, I guess I am looking for that "perfect" project I want to try. OCtoolguy and heppnerguy 2 Quote Link to comment Share on other sites More sharing options...
tgiro Posted March 31, 2019 Report Share Posted March 31, 2019 13 hours ago, meflick said: Dick, do you subscribe to the Scroll Saw Woodworking & Crafts magazine? If you do, look at the Fall 2018 edition, Issue 72. They did an article on the SpectraPly on page 66. They used it to do several different types of scroll work. They had JGR use some and she created a chameleon with it. Bruce Shea did a beautiful bowl with stars, then they had a puzzle, a bracket, and an ornament. Our Woodcraft store sells small blanks for pen turners of the material. It is not cheap stuff and it takes a while to receive your order from Cousineau because it is "custom-made". The magazine says it starts at $52 for a 3/4" by 9 1/2" by 40" piece. I wanted to give some of it a try so i ordered some thinking hubby might also want some for turning. It seemed to take forever to get it but it finally arrived. I have not yet done anything with it. Given its expense, I guess I am looking for that "perfect" project I want to try. Melanie, sign up for their email blasts. Yeah more spam, but they will have a sale for just about anything. Their recent St Patrick's day sale took 50% off of their turning blocks. I got ten 10"x3"x3" blocks for $10 each. Every now and then their panels will go on sail, too. I get most everything I need from the 10x3x3 blocks that I rarely order panels. meflick and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 31, 2019 Report Share Posted March 31, 2019 14 hours ago, meflick said: Dick, do you subscribe to the Scroll Saw Woodworking & Crafts magazine? If you do, look at the Fall 2018 edition, Issue 72. They did an article on the SpectraPly on page 66. They used it to do several different types of scroll work. They had JGR use some and she created a chameleon with it. Bruce Shea did a beautiful bowl with stars, then they had a puzzle, a bracket, and an ornament. Our Woodcraft store sells small blanks for pen turners of the material. It is not cheap stuff and it takes a while to receive your order from Cousineau because it is "custom-made". The magazine says it starts at $52 for a 3/4" by 9 1/2" by 40" piece. I wanted to give some of it a try so i ordered some thinking hubby might also want some for turning. It seemed to take forever to get it but it finally arrived. I have not yet done anything with it. Given its expense, I guess I am looking for that "perfect" project I want to try. I do subscribe to the magazine but I missed that article or just blew past it. I really do not find very much in it that interests me but I know if I do not order them, they will come out with the perfect pattern that I really wish I had. I even got a small write up in it about 4 years ago, after I had made 6 boxes for a local bride to give to her mother, mother-in -law to be, and here 4 brides maids. That made me feel pretty good about myself. I am not sure if I will be buying any of that wood very soon, as I have so many patterns I need to cut, but I will make sure I save your post. I was so fascinated by the beautiful bowl that was made from it. thank you so much for taking the time to give me this information. You are the kind of person that makes the THE VILLAGE such a wonderful place to visit and get to know more people. Dick heppnerguy OCtoolguy and meflick 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 31, 2019 Report Share Posted March 31, 2019 47 minutes ago, tgiro said: Melanie, sign up for their email blasts. Yeah more spam, but they will have a sale for just about anything. Their recent St Patrick's day sale took 50% off of their turning blocks. I got ten 10"x3"x3" blocks for $10 each. Every now and then their panels will go on sail, too. I get most everything I need from the 10x3x3 blocks that I rarely order panels. I thank you for taking the time to let me know this. Your piece is so absolutely awesome that it blew me away. I am keeping this information in my files for when I decide I am ready to splurge and give this wood a try. I love how I keep learning new things on this site and ever grateful for people like you who are so talented and so willing to share your knowledge with people like me Dick heppnerguy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eugene Downes Posted June 18, 2019 Report Share Posted June 18, 2019 Here are a couple box's I have made. The first one I keep my Medicine in and the next was a Sewing Box for my Wife. meflick, OCtoolguy, romka555 and 6 others 7 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 18, 2019 Report Share Posted June 18, 2019 Very nice boxes. OCtoolguy and Eugene Downes 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted June 19, 2019 Report Share Posted June 19, 2019 On 3/25/2019 at 10:00 AM, meflick said: Ok, this will be a duplicate post as I am adding this box to my "what I have been up to lately post" with some other things but this is the box I made on my scroll saw last week. The directions and the patterns for it came from the staff of Woodworker's Journal - Keepsake Box from Aug. 20, 2014 and was found here: http://www.woodworkersjournal.com/keepsake-box-project/ I used poplar because I had plenty of that on hand and THEN read that it is not a good wood for staining. (It's grain pattern tends to absorb unevenly.) I had it because that is what I use when I am cutting out Iggy/Harvey's animal puzzles and I don't stain those. I did apply a pre-stain wood conditioner. Then applied American Chestnut wood stain about 3 or 4 coats. Then added a shellac finish. It turned out ok I think but next time will not use poplar when I want to stain. I am still trying to decide on what I want to put as far as a handle (if at all) and whether I want to flock the inside of the box, and if so, what color. Very nice! Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted June 19, 2019 Report Share Posted June 19, 2019 Wow! You all are truly wood artists. I hesitate to post anymore of my stuff. Fantastic work folks. Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted June 28, 2019 Report Share Posted June 28, 2019 Well, I just realized that my jewelry box qualifies. I already showed this in bragging rights but I'll show it again. John B, Travis, Tomanydogs and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.