Popular Post Scrappile Posted June 12, 2019 Popular Post Report Share Posted June 12, 2019 (edited) Haven't finished much lately. Waiting for my hand to heal up and so many new things I am trying to work at. I did finish cutting this this evening and I really like it. This is a Charles Hand pattern caller "Tigris" pattern "orno5". Says it is approx. 215 cuts, but I really feel it is more. Took me awhile and not finished. I have to sand it and finish applied. I want to mount it on a red background as pictured, only maybe silk...pictured it is sitting on felt. This pattern was unique to me. It said it was a challenge, and it was, only for me in the time it took. But I also felt it was a good pattern for someone that was wanting to do detailed fretwork. I gave lots of practice. Many of the same cuts repeated only getting smaller and smaller with each one... A close look at it will show what I am trying to describe. Anyway, although it took me a long time to cut... I really enjoyed it and have another one of his ornate ones to do. Thanks @Charles Hand Edited June 12, 2019 by Scrappile GrampaJim, frankorona, New Guy and 12 others 13 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted June 12, 2019 Report Share Posted June 12, 2019 WOW that is a beauty. How big is it Paul? Did you start in the middle and work your way out? It looks so fragile. I take my hat off to you, excellent work. Marg Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted June 12, 2019 Report Share Posted June 12, 2019 What a cool pattern. You did a great job Paul. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
JimErn Posted June 12, 2019 Report Share Posted June 12, 2019 Awesome work! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted June 12, 2019 Report Share Posted June 12, 2019 (edited) Wow!..I like it Paul...Wonderful work !.......What blades did you use ? Edited June 12, 2019 by Scrolling Steve Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 12, 2019 Author Report Share Posted June 12, 2019 6 hours ago, wombatie said: WOW that is a beauty. How big is it Paul? Did you start in the middle and work your way out? It looks so fragile. I take my hat off to you, excellent work. Marg It is approx.. 11" across x 12" tall, I started at the top of the right side worked that half down to the nose, then did the left down to the nose and the the rest. 1 hour ago, Scrolling Steve said: Wow!..I like it Paul...Wonderful work !.......What blades did you use ? Went through a lot of blades using a Pegas #3R Reverse Skip. I was cutting 2 1/4" BB stacked. It really ate up the blades. Lost some pieces on the bottom piece of the stack, don't think I can save it. I will try a different blade when I get around to cutting the elephant. amazingkevin, Scrolling Steve and wombatie 3 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted June 12, 2019 Report Share Posted June 12, 2019 Amazing just Amazing !!! amazingkevin and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 12, 2019 Author Report Share Posted June 12, 2019 1 minute ago, Foxfold said: Amazing just Amazing !!! You have the elephant,,,,, start cutting. Quote Link to comment Share on other sites More sharing options...
Foxfold Posted June 12, 2019 Report Share Posted June 12, 2019 Just now, Scrappile said: You have the elephant,,,,, start cutting. It's sat glued to a piece of wood next to my saw 'staring' at me, daring me to try.... GPscroller 1 Quote Link to comment Share on other sites More sharing options...
Kepy Posted June 12, 2019 Report Share Posted June 12, 2019 Beautiful. You definitely have more patience than me. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Wilson142 Posted June 12, 2019 Report Share Posted June 12, 2019 Beautiful piece! Certainly looks like more than 215 cuts to me. And using Pegas #3R Reverse Skip blades. That's a lot of turning. Did you do some breath holding when removing your pattern? Scrappile and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 12, 2019 Author Report Share Posted June 12, 2019 19 minutes ago, Foxfold said: It's sat glued to a piece of wood next to my saw 'staring' at me, daring me to try.... Start and work on it from time to time. I usually have a few projects going at a time so I can switch around. Work on one a while the set it aside and work on something else for a while. Foxfold 1 Quote Link to comment Share on other sites More sharing options...
lew Posted June 12, 2019 Report Share Posted June 12, 2019 Just WOW!! Amazing cutting!! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted June 12, 2019 Report Share Posted June 12, 2019 terrific job, it's beautiful Scrappile 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted June 12, 2019 Report Share Posted June 12, 2019 You did a great job on that Paul. I can see where it would be a challenge. I stack cut a lot of BB to and it does eat up a lot of blades. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted June 12, 2019 Report Share Posted June 12, 2019 Absolutely Stunning! A true piece of art! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted June 12, 2019 Report Share Posted June 12, 2019 Holy guacamole! Very nice job! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted June 12, 2019 Report Share Posted June 12, 2019 That is no less than stunning! Beautiful work. I too have been cutting 2 up 3/16" plywood with Pegas 2/0 MG and the blades do not last very long. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Rob Posted June 12, 2019 Report Share Posted June 12, 2019 Phenomenal work. Love the choice of red for the backer too. Rob Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted June 12, 2019 Report Share Posted June 12, 2019 I normally do not comment on this type project but this is outstanding. I have no idea how you did so many intricate cuts without breakage. You did a great job! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted June 13, 2019 Report Share Posted June 13, 2019 You love a challage and ace them too!!! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted June 13, 2019 Report Share Posted June 13, 2019 Another mind blowing project Paul, extremely well done. Jeff Scrappile 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted June 14, 2019 Report Share Posted June 14, 2019 Great work, Paul! Thanks for sharing and God Bless! Spirithorse Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.