JTTHECLOCKMAN

You got that right. Just a warning when you plug into the computer make sure you follow instructions to unplug or else it will delete photos. Want to see that safe to disconnect sign before pulling the usb out.

Not a master but maybe can shed some light. What kind of baskets are you trying to make??? Do you have a photo. There are several types. #12 blade of any kind is a large blade and made for cutting timbers not scroll work.

I use to be able to transfer my photos from my camera to the computer and for some reason this has not worked. Not sure if the cable is bad or not. But what I do now and is very easy to do with camera or phone and that is pull the card and use a usb adapter to read the card. Works great. I can then pick and choose what photos I want to save and make a file folder or add to existing folder.

Just a friendly reminder, whatever finish you choose to use do it with safety concerns in mind. Work safe. Any oils such as Watco Danish oil and BLO will have a strong odor for some time so be aware of where you work with it (I always do mine outdoors) and even when you place to dry that smell will linger for awhile. Also do not discard the wiping rags or any kind in piles in the garbage. Set them outside to dry before getting rid of them. They can have thermo reactions and burst into flames. The same goes for lacquers and even polys. If spraying do so outdoors or in a safe setup because the overspray is hazardous. Do not breathe in the overspray. I know we all probably know all this and follow good finishing techniques but it does not hurt to remind ourselves the dangers in a shop and working with and storing finishing materials is a huge concern no matter what the product is. Good luck and happy turning.

Joe I again looked on Wildwood site through all their plans and patterns and I guess they discontinued it. Probably not enough sales when they did their trim down. You could ask them by email or by phone. I have not been able to find that pattern anywhere else but I will continue to look.

I use all hard woods especially red oak. Never use plywoods or pine. So my go to finish is Watco Danish oil. I just dip and let dry after i wipe the pieces off a couple times. I then apply a coat of Watco wood polish and buff lightly to a nice sheen. The key to my finish is I always sand the piece down to 220 grit before dipping. Have been doing this for over 30 years and it has worked well. If i am using an exotic wood such as for a base then I highly polish that with a buffing wheel.

Depends on the type of baskets. If doing collapsible baskets #7. Others, #5 works for me.

I started looking for that pattern for you and having a hard time finding it. Here is one from Steve Good scrollsawworkshop.blogspot.com/2011/09/multi-layered-911-memorial.html Joe I tried looking on Wildwood design site and have a hard time finding it. Since they merged with Cherry Tree that web site of theirs really stinks. They are a shell of what they used to be . All I can say is from an old catalog the pattern number is #60219 called America Will Always Remember and comes in 2 sizes (both included) I tried looking in my pattern collection and can not find the large pattern I had shown. I really need to organize my pattern collection. I have stacks and stacks of different patterns over the years. I did that many years ago. There was another vendor that carried it also but I can not remember who. Maybe do a search in some of the other vendors. I have been out of the game for almost 3 years so I am at a disadvantage somewhat. Like I said when Wildwood was just by themselves they were a well organized vendor. now I have no clue with them. Good luck and I am sorry. If I come across something I will post.

Did not see that one. You could be right. Funny the way the brain sees things at times.

Sorry not free. Got from wildwood designs years ago.

I use one of two methods and they work equally well. The first is the hot glue on the edges. Simple and fast. The other is blue tape on the wood and then sandwich a piece of white copy paper with spray adhesive on both sides. A lot has to do with the fact if i have a lot of cutting to do on the outside edges of the pattern. The more I have to spin the wood the wood the more I will lean to using the sandwich method. If it is a simple cut on the edges then hot glue is fine. Happy scrolling.

I always wear a dust mask whenever cutting in my shop and have a dust collector as well as an air cleaner that stays on for at least an hour after I leave the shop. You would be surprised how much dust that catches. Would not be without one these days.

Every time I see this pattern I can enjoy the time and effort put into it and yours is no exception. I have the pattern and it is on my to do list for quite some time. You did a great job all around and it is something that you should be very proud of. Nice neat and clean cutting. Thanks for showing and I bet you will be asked to do others.

Down but not out just yet I really did not realize how much I missed being in my shop but glad to be back and have alot of catching up to do. I guess our shops are like our little sanctuary where all is right with the world when we are in there and no one or anything can disturb this peace. Even our mistakes or uh-ohs are just blibs. Happy scrolling everyone.

As mentioned pros and cons of each saw and I will take my RBI saws any day of the week. It is a rythem you get into and the more you use it the more it fits you. I do not even bend over when threading the blade on my rbi. I love bottom feeding because this is what I grew up with and know the best. Those blades bend for a reason. For the amount of times I tilt my table I can count on one hand. Another good saw hits the market. This site is a treasure for saws. Good luck with the new saw and hope you make lots of projects with it. Thanks for the review. May help someone.

That is no cheap saw and if he bought it new and only had it for 4 months. There is no time on that at all. Be like brand new. That saw is the upgrade to the older Hawks such as I have. When I was sick and could not work in my shop my saws did not see action for almost 3 years. I have been using them the past 2 + months now and not one single problem and I have already cut many projects on them. I will endorse RBI Hawk saws.

You maybe right I do not use them. That is one on you though. When buying a saw especially in that price range you need to do your homework. It still is a slammin good deal for someone. I do hope someone takes you up on it. They are great saws.

Start low and always can go up.

Man there is a deal for someone for sure. Where we you when I bought mine some 15 years ago . All that because of swivel thumbscrews. They do make flat end spiral blades. Someone needs to jump on that saw.

I would be gasing the truck up and heading right over if I lived in the area. Here is what they run new. https://www.scribd.com/doc/62919060/Hawk-Woodworking-Tools-Catalog The 26 saw is a large saw and I have an older 26" I am a Hawk fan all the way. Not many parts to break and no problem getting to talk to anyone but most times you can figure it out yourself if you are any kind of mechanically inclined. You see many Hawk saws on ebay and the 26" usually go around $600 and make an offer is usually attached. Now of course condition is always key. In your case this sounds like a brand new saw basically. My opening offer would be $750 Now mind you I have 2 RBI hawks a 220 and 226 but would not hesitate for something that new.

A good sharp bit should drill paper with no tearout. Do not use brad point bits. They have a tendency to grab the paper more. It maybe that you need a better glue for the paper and need to press the pattern down and let dry before you start your drilling.

The hegner I have, you set up a blade in a holder similar to the hawk and slide it in very easy to do. I am not familiar with the jet.

Jerry, did you watch both videos in this thread?? Some really good info. I am from the school of if it came with the saw then it should go back on the saw. They put them there for some reason. www.scrollsawvillage.com/topic/21306-dewalt-788-question

Very nicely done and looks like all are cut well. Just too bad we do not get paid enough for the time spent making projects like this. But the joy of doing it is what keeps us at it. Thanks for showing.

Yes I can see it because of the tilting head. But all use the same blade motion.