ike
-
Posts
4,275 -
Joined
-
Last visited
-
Days Won
5
Content Type
Store
Profiles
How-To & Articles
Scroll Saw Reviews
Clubs & Organizations
Clubs & Organizations International
Pattern Shop
Suppliers
Village University
Help Desk
Forums
Gallery
eBooks
Everything posted by ike
-
Glad to hear that you had a good time. IKE
-
I use olsons blades and have no problems I stack my plywood 3 pieces very seldom do i loose a piece. but for some reason I am cutting a single piece of plywood I use a # 3 reverse blade. run the saw at a slow speed and let the blade the cutting.. On my Dewalt 788 when cutting i piece i run it at 3 to 4 speed.. I have used an under lament plywood for some projects and that is cheep 4X8 sheet about $13
-
Walnut is my favorite wood it takes some time to cut but it is worth it. beautiful work Kevin thanks for showing IKE
-
You said once that you would like to see a Base Ball game. Did You. And did you get to the Grand Canyon you were so close.
-
well Done. IKE
-
I used an aquarem air pump for a long time, most scroll saws don't have a very good pump, I now have 2 DW 788 saws and have no problem with the air on either
-
I have seen this used it is nice but not to my desires a business card secured to the back of a craft is good enough for me. d$29 buyes a lot of wood.
-
I had an order for a wedding cake topper I quoted them a price no money down. i designed it and they said Ok . the next day they wanted to change the design OK so I got started and than they changed there mind again. z told them to forget the order and thru the finished part away I would not make the order at all. so they only had about a week to get a new cake topper. mSo now I get a deposit before I start.
-
I use 3M 77 I get it at Michael's with a 40% off coupond
-
I broke 2 last week and that was the first in a couple of years, but I had extras .
-
Kevin go to Home Deoot and buy a fuse they are in aisle 2 ( electric dept) they are in packages of 3 or 4 and are only a couple of bucks. IKe
-
wish you good luck on your repairs
-
looks great thanks for showing
-
Nice clean design and very well cut and finished. Thanks for showing
-
Keep it you have too much work in it, will never get out of it what you put in it. great cutting. I never make a picture with out stack cutting it, use at least 3 pieces. some times one piece is bad with it chipping , you were lucky on that one.
-
My dw788 motor boggs down when I increase blade tension
ike replied to hbeery10's topic in General Scroll Sawing
I have the same machine in fact 2 but never had that problem. Ssorry IKE -
I always install hinges with the lid closed also with doors closed
-
dropping my phone camera way to many times again
ike replied to amazingkevin's topic in Bragging Rights
very nice work thanks for showing -
Nice looking box, thanks for showing
-
Tight bond is the answer, but be sure that It is moated correctly. It is very difficultt to take app art after the glue is set., Tightbond is stronger than the wood .
-
very good
-
looks great
-
I have scroll saw woodworking and crafts, I don't know if there is any other Scrolling mags.
-
I drill by drilling so far back out and clean the drill repeat this several times till you are thru, I have drilled thru steel with a.015 drill ( that is 1/64 drill using this peck Drilling system, and it works fine on wood also.
-
your blades may have oil on them from the manufacturing process clean with alchol and sand the gripping area of the blade
