Jump to content

scrollerpete

SSV Silver Patron
 View Profile  See their activity

  • Posts

    2,362

  • Joined

  • Last visited

  • Days Won

    97

 Content Type 

Everything posted by scrollerpete

  1. scrollerpete
    I made this marquetry at least 20 years ago, the company has been out of business for at least 10 years. Sorry I cannot help.
  2. scrollerpete
  3. scrollerpete
    Just to reiterate, I decided to have my own crafts show in my garage where I live. We are a community of 185 double bungalows all retired people and I decided to get rid of some of my inventory. It will be held tomorrow between 10 and 2.00. Here is a video of my set up.
  4. scrollerpete
    Just tried something different, it was on SSWC magazine # 32. Did not have time to make more because I have my craft show on Saturday
  5. scrollerpete
    A set of leaf bowls from Sheila Landry
  6. scrollerpete
    Nice job Denny, Iggy must loved your orders and your clients loved your talent.
  7. scrollerpete
    First of all let me say that Travis does not want any politics on this Forum and I agree 1000% I find it inappropriate for a Canadian to post such a thing, I am sorry that he feels that way and try to get his point on this site.
  8. scrollerpete
    The wife is making door hangers and she comes to the shop to have me cutting some stuff for her to use (happy wife is a happy life). Managed to cut some other stuff for the craft show Saturday. Bowls pattern from Sheila Landry, I cut some plexiglass to used on theLED base lights and since I used 1/8” BB backup with blue tape on to help the cut, we decided how about making napkins holder with them. Had time to cut the trivet, anxious to see how things turn out. I couldn’t resist to cut Steve Good pattern about “hand made with a scrollsaw” Enjoy
  9. scrollerpete
    Thanks for the info, will give it a shot.
  10. scrollerpete
    My Ex developed a bad back and forth movement. I tried to adjust it by first make sure that the arm is parallel to the table (out 1/8”) and then I turned the motor clockwise until I cannot turn it anymore to the wire from the motor to the scrollsaw is tight against the saw. It was the best for back and forth movement but still not enough. Do I have to start counterclockwise from as far as I can or is there other remedy. The saw is closed to 10 years old?
  11. scrollerpete
    Nice cutting Denny another happy customer, that is the way we like it
  12. scrollerpete
    Don they are available at Amazon.ca https://www.amazon.ca/EEEKit-Adjustable-Decoration-Decorative-restaurant/dp/B07DCPFD4M/ref=sxts_sxwds-bia-wc-p13n1_0?crid=22FPBTLI4LW8&cv_ct_cx=led+base+light&dchild=1&keywords=led+base+light&pd_rd_i=B07DCPFD4M&pd_rd_r=2728959a-3216-4d4d-a164-99ffc12f4302&pd_rd_w=kTyA8&pd_rd_wg=72485&pf_rd_p=525b5b43-fe6a-43d9-b3c1-c80493c849df&pf_rd_r=6VPPFVSNESV3VM562STY&psc=1&qid=1603545044&sprefix=led+base+%2Caps%2C168&sr=1-1-791c2399-d602-4248-afbb-8a79de2d236f
  13. scrollerpete
    Since our center is closed due to COVID, I decided to hold a craft show in my garage. Where I live is a community of 185 homes all retired people. I hope I can reduce my inventory and makes a few $$$$$$. Here are more stuff ready to go on the show.
  14. scrollerpete
    Way to go Don, when there is a will there is a way. You will make lot’s of kids happy.
  15. scrollerpete

    Wayne,

    any chance to send it via PDF, having problem to print the picture. Thanks again for doing this.

    Pete

  16. scrollerpete
    I like it very much
  17. scrollerpete

    My wife is a butterfly lover, I saw your acrylic butterfly and just wondering if it is your pattern, or where I could get it. Might be a nice little Christmas present for her.

    1. flarud

      flarud

      Hello,, not my pattern.  It is from Steve Good's site.  He has a few different ones.  I picked one that I liked and made sure that I could add a little rectangle piece to the bottom that would insert into the LED base.  Did you see the link that I included in one of my posts?  If you are intending to get the LED base for it, I would wait to cut the butterfly until you get the base so that you can measure the slot opening on the base and transfer that measurement to the bottom of the butterfly. 

      Barry

    2. scrollerpete

      scrollerpete

      Thanks for the info Inappreciate.

  18. scrollerpete
    I would recommend FDUR #1 and also thePegas MGT #1 R
  19. scrollerpete
    That looks great Don, I agree 1/4” is too thick
  20. scrollerpete
    You did a great job, the picture seems to come alive. You should be proud of yourself.
  21. scrollerpete
    I bought both patterns and they are approximately 3” x 3”, I stacked cut them 3 or 4 layers of 1/8” BB plywood.
  22. scrollerpete
    Frank you can try Shoppers Drug Mart and Home depot
  23. scrollerpete
    Hope that they diagnosed it early enough that the treatment will help him, he is a great guy for our community.
  24. scrollerpete
    Had a real good day in the shop and my wife had a good day painting the COVID decorations. So far I have 56 of theCovid decorations and it might not be enough, already 21 sold.
  25. scrollerpete
    Thanks to Don in Brooklin that made the pattern for me, the lights were purchased from Amazon (Canada) https://www.amazon.ca/gp/product/B072Z7NX1B/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 I am pleased with the way they worked, I used dowels and just wrapped the lights around it. My daughter will get this one for her birthday, Ihave already some customers that are ready to order.
×
×
  • Create New...