Mike Crosa

Great job at creating the pattern and making it.

You have been quite productive. Very nice work.

Yes, very good. I’m just not in a position to have something like that.

Rockler has adapters. They come in a box with various sizes.

Wow. Hard oak! Beautiful job. You have more patience than I have.

Hi Jim, I wish I could do the same but my patio is surrounded by a six foot fence in my community. HOA would have a fit if they saw me working.

I work outdoors in my patio. The scroll saw is in a garden shed. The kind that the top lifts up. I put the vacuum outside the shed and I am able to hear music fine. The vacuum is a small Harbor Freight model. In fact it is the smallest they have.

I used 1/4 inch tubes I got from amazon. $6.49 "Waziaqoc 2PCS Flexible Water Oil Coolant Pipe Hose, with Round Nozzle Hose and Flat Nozzle Hose, 1/4" Thread Plastic Adjustable Cooling Tube. I did not use either of the nozzles that came with it.

I have had the Scrollnado installed for a few months and although I was happy with the nozzle up top the bottom left a lot to be desired. After a few hours of sawing the bottom of the saw together with my pant leg and a tray I had under the saw would be covered in saw dust. A lot of saw dust. 2 weeks ago I switched the intakes from the plastic tubes supplied with the scrollnado, to loc line 1/4" by 6" hoses. I saw an immediate difference. The top was cleared much better and the bottom also improved but I was still getting a lot of saw dust. Then as they say, I had an Eureka moment. Why not attach a funnel to the bottom loc line. The loc lines were stiff enough that they did not move. So I found a small funnel, part of a set I got from Harbor Freight. Think the set was less than $3.00. I had to cut off a piece of the funnel so that the loc line ending would fit inside. I taped it with painters tape and after adjusting the position I started sawing. What a difference. I have included photos of the modification and also a before and after photo of the dust accumulated after 2 hours of scrolling. As a neighbor I used to have used to say "I am very well satisfied. Mike

Welcome to the Village from Miami, FL

Impressive work!

What everyone else says. A wonderful job cutting. You should be proud.

Hope you have a fast recovery

Welcome to the village.

Nice cutting. Walnut?

Nice work.

The idea of a cut out is good. May try it out. Thanks.

Thanks to Manny M for the pattern. I used 1/4" Cherry and a Pegas #3. Cut like a dream. I really enjoyed the cutting and going to make a few more for friends and family.

Agree wonderful work.

Welcome to the Village from Miami, FL

Agree excellent cutting and design.

Kev, I think you will find it has changed a lot.

Many accounting and bookkeeping softwares have come out through the years. One that comes to mind right now for the more basic business is WAVE accounting software. It even has a free copy that provides much of the bookkeeping requirements of the small one person business. Give it a look. I have a few clients on it and they love it. Mike

Thanks all. I was thinking of putting a larger base on it, but decided to angle the base so that the letters tilted up a bit.

Made a name plaque for my soon to be CPA, my Grandson