Leaderboard

This is Jim Blume's "Heading West" pattern that was designed to be 11X14. I decided to make it a little more challenging by cutting it into an 8X10. Baltic Birch stained Ipswich with a black backer and a Pine frame. Both cutting and frame were sprayed with several coats of Polyacrylic with light sanding between coats. This was a lot of fun to cut and surprisingly the reduced size didn't make it very difficult. Thanks, Jim, for another great pattern.

This will be a birthday gift for my sister. She has a collection of rubber ducks. I thought I would add to it. Woods used: Poplar, Aspen, Tigerwood, Paduk and Walnut. Cut with #5 mg blade. Beeswax butter for the finish.

After seeing Ron Johnson's posting of toys I had to try my luck. Seeing his posing of the F-16 fighter jet I decided to make one for a nephew who is a pilot in this aircraft. Probably not the easiest pattern to choose for my first attempt, but I think it turned out OK. I am pleased with it, hopefully my nephew is and you are too. Jerry

Pattern by toymaking plans.com

Finished this beautiful Russ Beard pattern, double stacked on 1/8” Baltic Birch Plywood, cut with Niqua #0 Pin Less Straight blades, needs to be Oiled and a framed. This will be my last cutting for a while I have run out of blades. It is what it is, circumstances.

I’ve been a Waylon fan for almost fifty years. I was at the Opryland Amusement Park in Tennessee around 1975 and heard him play, not really knowing much about him, and have been a fan since.

Finally I have an opportunity to cut new projects by new scroll saw - Proxxon DS 230. In general, if you have a choice and financial opportunity, then I would not recommend this scroll saw, but at the moment for me it has some advantages. Anyway here is my first project in 2 year - 3D sphere. I hope such patterns will be popular: it looks unusual and eye-catching, interesting to assemble, it could be made of scraps of wood (as each piece is not large) and it could be assembled without glue. I plan to make more 3D geometric patterns, so what do you think of this project and such patterns? Video of making 3D sphere Pattern - https://alexfoxua.etsy.com

Was tired of the way my shop had been since we built it 11yrs ago, had a swing out table which blocked a lot of space, also making impossible to get to the cupboards behind it….my solution was to get rid of the swing out table, redo the bench behind it, and make a flat/level 4x4 assembly table…..put hardboard on the 4x4 table this morning and on the workbench on other side of 10x24 shop…..I’m very pleased with the way it turned out….see before and after pics.

Just finished this beautiful Russ Beard pattern of the Viking Girl, I double stacked them on 3mm Baltic Birch Plywood, cut entirely with a Niqua#1 Pin Less Blade, now to clean up, oil and frame. My wife Loraine has claimed these two as her own, who am I to argue.

Here it is, finished and ready to hang on the wall. BTW, my wife has claimed it and it is to hang on our wall. Since I last posted about it, after many side-tracks and disruptions, I have encased it in clear epoxy, sanded and clear-coated it with lacquer. The wood is 3/8" mesquite and I used Pegas MGT blades, mostly #3. The finished product is roughly 7-1/2" H x 7-3/4" W. It was a fun project to cut although it took many hours. I had not originally planned to do the epoxy but the words at the bottom were fragile. There are several single bridges between the H, the N, the 3 and the 6. They broke and I had to glue them back together. You can probably see it if you look close enough. Now, with the epoxy, nothing is going to break. I will share the pattern if anyone is interested.

Steve Good Pattern, still need to clean up and fix the S and stain. Made for Hubby. He loves his coffee.

This project started in a reverse order to the usual format. This beautiful piece of mahogany was given to me by a friend. It was 13' x 10" x 1 3/8" thick. I was thinking of various subjects when I decided to check out the patterns in the Scrollsaw Village Patterns Section. When I saw the fantastic "Maltese Puppy" by superb pattern designer, Jim Blume, I knew this would work very well for this project. The wood was sanded, the edges were routed, and the pattern was attached with 3M spray adhesive. Pilot holes were drilled and the scroll work was completed with spiral blades. The carving was completed using a Foredom Rotary Power Carver and the fur was produced with multiple passes with the top edges of three different sizes of columnar bits. The puppy was colored with Minwax Polycrylic Finish and artist acrylic paints. The background was finished with multiple coats of polyurethane finish. Thank you Jim, for the beautiful design of this pattern. Dick

Eight Standing Miniature Birdhouses patterns by the late Diana Thompson. I used Poplar for the birdhouses and Eastern Red Cedar for the birds except for the eight one, I used Lacewood. Cut on the Pegas scroll saw using Pegas #3 and #6 Super Skip blades. After sanding, a dip in diluted Shellac and another light sanding. Comments welcome.

My high school English teacher always had the senior class memorize the first 18 lines of the prologue of The Canterbury Tales. Written in Old English, it is the story of a group of pilgrims on their way to Canterbury Cathedral. I included in the frame the line which translates, "Then folk long to go on pilgrimages" along with some nods to some things mentioned in the prologue, the rain, the wind, the sun, and singing birds. I'll be surprising Mrs. Hudson, my English teacher, with it soon. It is around 11" X 14", 3/4" alder wood, painted with acrylic craft paints with a spray clear coat.

Alex, Thanks for the great patten. Some areas were a challange but it was a joy to cut. I did add some bridges when I thought some pieces would become too floppy. I actually stack cut this to make 2. No harder than cutting one. 1/8" BBPW on 3/16" backer. Shellac and Gloss Lacquer finish.

This Sandhill Crane pattern is by Steve Good. I used 1/4" Baltic Birch plywood for all the pieces. Cut on the Pegas Scroll Saw using Pegas #1 MGT blades. After a light sanding, dipped in diluted Shellac and another light sanding. Comments welcome.

A couple I recently finished up. Standard 3/8" ply from Lowes, frames are scrap lumber ripped down. Stains are Minwax "Honey" and "Natural". The car came from the pattern library here, and The Shadow was a pic I found online. Filled in his scarf with some red acrylic paint that my daughter wasn't using (she's switched to oils). Wanted to put "Who knows what evil lurks in the hearts of men? The Shadow knows." but figured out pretty quick that the text would have to be incredibly tiny to fit on there. Maybe if I save up my allowance and am able to get a deeper saw....

Spent sometime in the shop before golf start. Made a charcuterie board out of roasted maple and a few bowls out of left over wood.

Suffered an eye injury ~3 weeks ago. Debris blew up under my glasses when mulching on my 42" deck tractor mower deck. I have been pretty much blind in my left eye, due to corneal injury over the pupil area. It was like looking through a glass with thick petroleum jelly on it and darkened. The whole eye was bloody red. Quite a bit of pain came alongside that for well over a week. I was prescribed an ointment for my eye 3x/day and steroid drops 2x/day. I had my 3rd follow-up with my eye Doc today (went to urgent care when I was injured). My eye has finally superficially healed on the surface (that's good), and also improved 4 steps on the eye test this last week. Pressure also moved in the right direction. She was pleased that I turned the corner as she was concerned last week at the slow healing. Now comes the continued under-the-surface healing so we wait. Scheduled an appointment to be back in a month. No more steroids in the eye, however, the ointment is only 1x/day now... When I got home this morning after the appointment, I tried some scroll sawing I actually could see my lines! FINALLY!!! cut the remaining pieces and rattle can finished my 4-layer Memorial Day pieces, which I could not work on while I was blind. Gun, dog tags, boots, & helmet. When I tried working on it when I was first injured it was a major struggle and had to quit for a few weeks, did an hour on Sunday during my YT live stream, but that was a struggle... now it feels like I am almost back to normal. Not fun being blind in my eye, thankful, it was temporary. Ran out of black paint on one piece so I did not speckle it the way I wanted. Getting more tomorrow.

Latest ones. Angel is Ridgeback Wood-Lamp pattern, double stack 1/8 BB ply. 164 cuts with #3 ultra reverse and #3/0 spiral 11 X 17 inches. Fishing rules by Jim Blume on BB ply 8 X 8. 70 cuts with #3 ultra reverse.

I have a couple friends that love baseball and puzzles, so for their birthdays I’ve been making them a puzzle from a Norman Rockwell baseball themed illustration. This year is #10 in the series. The locks around the edge add a little challenge rather than a straight edge to identify the outside "frame" of the puzzle.

The steer head was my first real scroll project using my 90's era, single speed, pin tpe blade scroll saw. The RN is my favorite, its a Steve Good pattern that I modified to include the recipient's initials. I used scrap from pallets and other sources, mostly pine. My latest is the nativity scene, Pictured is a pine practice cut, I did a few in popular for some friends. my cutting was halted in January with my stroke. I am waiting on my new saw, Dewalt 788, to arrive this week. ready to get serious!

My latest piece. Many hours went into this one. 11 x 14 x 1/8 inches BB. Spiral blades.

After finishing my complicated train project, I needed somthing quick to cut. I rambled through some of the clip art I had and found the F-16. I only had to add a few bridges. Pretty easy to cut. Quite a bit of info on the F-16 in wikipedia. It's been in production since 1974 and over 4600 produced. Over 25 countries operate the aircraft. Local interest for me. Locheed Martin moved the production of the aircraft from Texas to Greenville SC at Donaldson Field in 2019, just south of the city. (a few miles from me) Side note of interest: I was sitting on the back deck and this bird landed on the Hummingbird feeder. Its a Rose Breasted Grosbeak. It is rare in our area. He was heading north from South America. Pretty bird.

Our daughter was here with family last Thanksgiving. She admired the Jewel Box I had made a few years earlier. Guess I’ll make her one.

I planned to make a cactus, but couldn't decide which type to make, so I decided to make a set. I also did it in such a way that it was possible to change their places: any cactus fits any pot. Project consists of 2 parts, you can take out cactus of a pot and change it. Approximate size is 3 x 6 inches each. Cactus consists of 2 layers, pot - 4 layers. Video of making Cactus project Cactus patterns

Just finished this picture for an engagement present. The pattern was kindly made for me by Grampa (as usual a very nice pattern) It has been cut from 4mm Baltic Birch ply and finished with 2 coats of sanding sealer followed by 2 coats of acrylic lacquer. All comments welcomed. Now its time to start my next project - a PBY Catalina cut from a pattern kindly shared by Munzieb (thank you Munzieb for the pattern).

Ribbiting Frogs pattern by Jaeheon Yun and found in his book "20 Minute Scroll Saw Puzzles". I used 3/4" Poplar approximately 5 1/2" x 9". Cut on the Pegas Scroll Saw using a Pegas #5R MGT blade. After lightly sanding, dipped in diluted Shellac, and a second sanding and dipping. Comments welcome.

This Sandhill Crane pattern is by Steve Good. There are two patterns and I call this one "B". I used 1/4" Baltic Birch plywood for all the pieces. Cut on the Pegas Scroll Saw using Pegas #1 MGT blades. After a light sanding, dipped in diluted Shellac and another light sanding. Comments welcome.

Just finished this one

Hi Jerry: Sorry to say, I am not pleased with your project I'm sure you wanna know why It's because it's not on MY shelf. If I call you Uncle Jerry, can I have one? I will say, that it turned out great Well done, unlike me, your nephew will be pleased Have a nice day Fab4

I made wood-art pieces for a California friend of his beach house and the coast at Dillon's Beach.

Just wanted to share with everyone that after a few decades of scrolling and trying to find a setup that felt "right" to me, I think I've finally found it. The 16" King will be going to my daughter in October as she's interested in scrolling, and will be replaced with a 21". Though about the 30" but I really don't need anything that big. Still love my P-20!

Dog Puzzle - Rescue 1 pattern by Harvey Blyer. I used 3/4"Poplar approximately 8" square. I cut this at home on the EX21 using FD UR #3 blades. Yes, I still have some left over. Lighty sanded on the Mac Mop, dipped in diluted Shellac, and after dry, another light sanding. Comments welcome.

My dad was a Baptist minister. 50ish years ago he brought a discarded upright piano home from the country church he was pastoring and refurbished it. It stayed in my mom and dad's home till they passed away. Then my sister had it for awhile, but it's been stored in a garage for years now. My sister saw something similar to these somewhere and asked me if i could make her one of the key holders. I made her and her daughter the key holders and my son and daughter-in-law the one that says, "Love is the key." All the materials except for the text and the hangers came from the old piano. The little brass buttons are part of the key/hammer mechanism of the piano, called capstans. Felt like my dad was smiling while I worked on them. The chips on the keys were done by my mischievous son and nephew with a toy hammer. Maw Maw wasn't happy.

Dog Puzzle - Rescue 2 pattern by Harvey Blyer. I used 3/4"Poplar approximately 8" square. I cut this at home on the EX21 using FD UR #3 blades. Yes, I still have some left over. Lighty sanded on the Mac Mop, dipped in diluted Shellac, and after dry, another light sanding. Comments welcome.

Paul Newman as Luke Jackson/Cool Hand Luke. Cut in 1/2” alder. ”I can eat 50 eggs.”

Well, needless to say the saw came home with me. But here's the rest of the story...... When I got there the guy selling it (late 30's I guess) met me at his parents house, where the saw was. They had it out in the driveway. It looked like it was brand new, no marks on the saw top at all The guy selling it told me he bought it to do craft shows, but couldn't get the saw to "cut right" so he put it in the garage and bought a new Dewalt 788. He got the saw from an older lady who told him her husband bought it new, used it for about a month then passed, it had been setting in the shop since then. First thing I checked was the triangle piece (pic) to ensure the corners were still sharp, not rounded, thanks @OCtoolguy for that. As you can see it's looks new to me. All plugged in, took me a bit to get the blade in the lower mount, got it in there, applied the tension lever, turned it on. The thing took off about a gazillion miles an hour, things were slapping and making noise like it was flying apart. I'm glad I spent last night watching videos on this saw as I knew immediately it was way out of adjustment. So I released the front tension, adjusted the rear tension, it was way off!. Speed was full on fast, turned that down to just up from the slowest setting. Rear tension set, front tension set, turned it on.... Like a different saw, turned the speed up to about 1000 ram's and what a real pleasure. Extremely quiet, the "mom" commented it was quiter than her sewing machine. The guy selling it said "wow" it never ran like that. So, I turned it off, paid the guy and loaded it up! Smiling all the way home.

Springtime brings lots of birds to our backyard. I made this for my wife who is the bird lady of Moorpark!

What needs to be done Dave is provide ample air circulation around all sides of the wood. The best way to achieve this is either lean the boards against a wall or work bench so air can circulate or stack and sticker the boards. That entails placing stickers or sticks between each board with weight on the top board. Leave the boards alone until they acclimate to your shops humidity or lack of.

Dog Puzzle - Rescue 3 pattern by Harvey Blyer. I used 3/4"Poplar approximately 6" x 8". I cut this at home on the EX21 using FD UR #3 blades. Yes, I still have some left over. Lighty sanded on the Mac Mop, dipped in diluted Shellac, and after dry, another light sanding. Comments welcome.

Scenery piece that I just finished.

I have been using my local UPS store to enlarge and clean up my patterns and the manager, Chase, has been very helpful. Told him I would cut a car for him. He has a Jeep Wrangler Sport and loves to drive it on Folly beach in SC near Charleston. All the hardware on the front and the treads on the tires were the hardest part to cut. The rest is mostly straight lines. I did the "Paint-in" method on the tires and around the windows. I'll give it to him tomorrow when I drop off some packages for my wife. BTW, I tried to buy a Jeep pattern from H. Botas and even emailed him and looks like he has stopped selling them. He mentioned about going through some changes? on Facebook.

I have shown this before but it is sitting close by and I thought it really looked like spring. And I have a real urge to make some birdhouses of I purchased some cedar boards a couple days age. Little late for this years brood of babies but start for next spring.

Ray, Here's what I did in my shop for a lot of my hand tools. Do you have enough wall space to do this? Also I have a smallish stand alone stackable toolbox. It's the red one on the right, I use as much wall space as possible.

I have enough trouble fitting the wood between my gut and the blade on projects that fit my 21" saw. Can't imagine swinging a project large enough to require a 30" saw. I'd be so far away I couldn't see the blade.

Last summer I helped a friend build a cedar privacy wall for a deck. My friend told the homeowner - once you touch it with stain or paint you have to keep touching it (in a few years) to make it look the same.

These are ornaments cut from 1/8" basswood (hobby lobby) it cuts well and as you can see, will take details without falling apart.

I felt this would get seen more here rather than the other forum topics so hopefully I’ll get some good input on this. I built two of these bucket gardens, one for a friend and one for myself. To do over I’d have just used treated lumber or cedar. But now that they are built I’m wondering what would be a decent finish to help preserve the standard construction 2x4’s. Originally I thought I had some leftover exterior paint but when I open the cans they are mostly dried up so I originally thought I could buy cheap lumber and use up my old paints I had laying around. Now that I’ve got to buy something is why I say to do over I’d just use treated lumber. Since this is a garden thing it’s obviously going to be outside and getting watered etc. Not looking to make it last forever but I don’t really want to just leave it raw either. Thinking about cheap options is someone else’s leftover paint from the restore places or some paint that was mixed incorrectly so long as it’s exterior and not interior but thought maybe I ask here as maybe someone has a better idea. Don’t really care too much about looks or colors really within reason, I mean I don’t really want fluorescent bright pink or totally ugly colors . Anyway thoughts on something to use or am I on the right track with just using an exterior paint and call it good. Nothing in this type of setting is going to last forever other than metal so I know it’s going to rot at some point.